User's Manual

SDR Repeater
User Manual V0.4
Page | 30
4.4.1.2 Location
This section allows the user to input the latitude and the longitude of the repeater.
4.4.1.3 Modem Box Settings:
This section allows the user to specify an alternative Repeater IP, Subnet Mask, and Gateway settings. These
settings are enabled when the Host/Remote switch is set to the Remote position. When the Host/Remote
switch is changed, the repeater will reboot and will result in a temporary loss in coverage.
4.4.1.4 Repeater Location Info / Repeater Installer Info
This section allows the user to specify the address of the repeater and also the information of the installer.
4.4.1.5 Date & Time
This section allows the user to specify the current date and time.