User's Manual

SDR Repeater
User Manual V0.4
Page | 33
4.4.3 Install- PCS
The PCS Install page allows the user specify the desired frequncies by inputting the Reference Frequency and
Bandwidth. The PCS module supports up to 3 non-contiguous bands. Bandwidth selection ranges from 1.25 to
18.75 MHz.
4.4.3.1 Install- PCS Band Selection
To specify a frequency, input a DL reference frequency and select either start, center, or stop from the
dropdown menu. Select the desired bandwidth from the dropdown menu under the Bandwidth column and
then click Set.