User's Manual

SDR Repeater
User Manual V0.4
Page | 24
4.2.2.4 Message Board
Displays the 20 most recent events.
o Clear: Clears the content that is currently being displayed on the Message Board
o Log File: Downloads the system Log File (events and alarms) to your computer
4.2.2.5 Install, Modem, and Power Status
o Installation: Displays whether or not the installation routine has been run (Not Installed or Installed)
o Modem: Displays the status of the modem
Disabled- No internal modem is present
Not Connected- Internal modem is detected, but no connection to the network has been
established
Connected- Internal modem is detected and a connection to the network has been established
o Power: Displays the power source that is currently being used
4.2.2.6 Repeater Info / Modem Info / Repeater Location / Technical Support / Installer Contact Info
Repeater Info: Displays the serial number, latitude, longitude, firmware version,
Web-GUI version
Modem Info: Displays the internal modem information (ESN, MDN, IP)
Repeater Location: Displays the address where the repeater is installed
Technical Support: Displays ADRF’s Technical Support contact information
Installer Contact Info: Displays the installer’s name, phone and e-mail address
Note: Once successfully logged in, the repeater model name and the
site/cascade ID will be displayed on the top of all the windows (except for the
Main Window).