Owner's Manual

11
Owner’s Manual
key; radio skips the current channel and scans other se-
lected channels in descending order.
3. Press SCAN key again, scan stops.
4. Adding or deleting a channel in/from the scan list. The dealer
can add or delete a channel in/from the scan list. Only chan-
nels in the scan list can be scanned.
n Priority Channel Scan
If your dealer has set a priority channel, when radio scans non-
priority channels, it will periodically sample the priority channel.
If desired activity is detected on the priority channel, it will
switch to the priority channel for communications.
n
Scan Revert Channel
The scan revert channel feature allows you to transmit on the
proper channel while initiating a call during channel scan. Press
[PTT] button, radio stops scanning and transmits on the revert
channel. This feature is set by the dealer.
n
Selectable CTCSS/CDCSS
CTCSS/CDCSS feature is used to avoid receiving unwanted
signals on the same channel. When CTCSS/CDCSS is enabled,
the radio only allows audio with the same CTCSS/CDCSS code
to activate the speaker. If CTCSS/CDCSS is disabled, the radio
will hear all calls on the same channel. When the dealer allows
CTCSS/CDCSS to be selectable by the end user, the operations
are as follows:
Press the [UP] key while holding down the [MONI] key to enter