User's Manual

14
Press the [UP] key while holding down the [MONI] key to enter CTCSS/CDCSS set mode.
In this mode, press [UP] or [DOWN] to select CTCSS/CDCSS.
Press [SCAN], LCD display toggles between OFF/CTCSS/CDCSS/-CDCSS:
CTCSS/CDCSS OFF: 00
CTCSS: 01 38
CDCSS: 01 83
-CDCSS: -01 -83
OFF
CTCSS
CDCSS
-CDCSS
Please refer to CTCSS/CDCSS table.
Press [UP] while holding down [MONI] to exit CTCSS/CDCSS mode.
Note: Though CTCSS/CDCSS feature can prevent you from receiving unwanted signals; it
doesn’t mean your calls are absolutely private.
 Selectable squelch level
If this feature is enabled by the dealer, then
Press the [DOWN] key while holding down the [MONI] key to enter squelch level set mode. In this
mode, press [UP]/[DOWN] to select the level, 0 9.
Press [PTT] or [MONI] or [SCAN] to exit the mode.
 High/Low power
If this feature is enabled by the dealer, then
While holding down [PTT], press [MONI] to toggle the power of the current channel between high and
low.
When the power is low, “Lo” will be displayed on LCD.
Key lock
The key lock feature is designed to avoid accidental pressing of keys. If this feature is enabled by
the dealer,
The operation procedures are as follows:
1, Press [SCAN] while holding down [MONI] to lock keys. When keys are locked, [UP],[DOWN]
and [SCAN] keys are inoperable, but [PTT] and [MONI] keys will still function.