User's Manual

7
Battery Charging Information
Standard Charger
1. Insert the radio and battery or battery alone into the charging cup. Charging begins and the red
LED will light continuously. When the charging cycle is complete, the red LED will change to green.
Charging time is less than 2.5 hours.
2. After the battery is fully charged, the charger will shut off automatically.
3. A flashing red LED indicates an abnormal charging condition, which can be caused by an old
battery or a defective battery. Contact your dealer for instructions.
Notes:
Batteries should be charged in a dry environment at room temperature.
If the battery cannot reach normal capacity after charging, you need to replace the battery.
Do not short out the battery terminals or dispose of the battery by fire.
Accessory Information
 Battery
Attaching the Battery (See figure
1
)
1, Insert the tabs, at the bottom of the battery, into the slots at the
bottom of the radio chassis..
2, Press the top of the battery towards the radio until a click is
heard.
Removing the Battery (See figure
2
)
1, Turn off the radio.