Service Manual

10
 Briefly press MENU key to display current channel information (frequency number
and interference eliminator code); Press and hold MENU key to enter setting menu;
 Press UP/DOWN key to increase/decrease channel number;
 Briefly press MONI key to enter channel scan mode; Press and hold MONI key to
begin monitor;
 Battery Save feature (It’s set by your dealer).
2. Clock and Alarm Clock Setting Mode
Turn the power on while holding down CALL key and PTT key simultaneously. After 2
seconds, the radio enters clock and alarm clock setting mode.
Press UP/DOWN to select upwards/downwards. Press MENU key to save and go to next
setting item. Press CALL key to save and go to the first setting item. If the current item is
the first setting item, press CALL key to save and exit.
In this mode, you can operate as following:
 Select to display clock or channel number in conventional mode;
 Set hour of the clock;
 Set minute of the clock;
 Alarm clock enable/disable setting;
 Set hour of the alarm clock;
 Set minute of the alarm clock.
3. Menu Mode
In conventional mode, press and hold down MENU key to enter menu mode.
Press UP/DOWN to select upwards/downwards. Press MENU key to save and go to next
setting item. Press CALL key to save and go to the first setting item. If the current item is
the first setting item, press CALL key to save and exit.
In menu mode, LCD displays “
” icon indicating that you can transmit/receive. LCD
displays channel information when pressing PTT to transmit. And the display returns to the
setting mode before transmission when releasing PTT or time out timer is due.
In this mode, you can operate as following:
 VOX feature enable/disable and five sensitivity levels setting (It’s set by your dealer);
 Call tone setting (five call tones) (It’s set by your dealer);
 Button beep enable/disable (It’s set by your dealer);
 Squelch level setting;
 Communication rang alarm feature enable/disable (It’s set by your dealer);
 Battery type setting.
4. Channel Setting Mode
Turn the power on while holding down MON and PTT key simultaneously. After 2 seconds,
the radio enters channel setting mode.
Press UP/DOWN to select upwards/downwards. Press MENU key to save and go to next
setting item. Press CALL key to save and go to the first setting item. If the current item is
the first setting item, press CALL key to save and exit.
In this mode, you can operate as following:
 Select channel number from 1 to 8;
 Select frequency number from 1 to 56;
 Select interference eliminator code from 0 to 121;