Manualshelf

Service Manual

ManualsBrandsAdvanced Wireless Communications ManualsElectronicsPortable FM UHF PTT Radio Transceiver
6789101112131415
11
Set the number of available channels from 1 to 8;
Scan Add/Delete.
5. PC Programming Mode
Insert programming cable into the programming jack and then turn the power on, the radio
enters PC programming mode.
6. Wired Clone Mode
Connect the radio with wired clone cable and then turn the power on while holding down
CALL and MON key simultaneously, the radio enters wired clone mode after 2 seconds.
And then press MON key to begin data transmission.
7. Default Setting Mode (It’s set by your dealer)
Turn the power on while holding down “+” and “-“ key simultaneously to restore the factory
settings after 2 seconds.