User's Manual

Page: 3 of 4
Button functions during All Scan:
• Power button functions normally.
• The PTT when pressed will enter the Tx mode on the latest valid channel in
memory and continue to scan after the button is released.
• A short press of the Channel Up button (All Scan) will terminate the All Scan
mode. The radio will then return to the last valid channel.
• The Volume UP/Down is disabled during All Scan.
Dual Watch:
When enabled the current channel and the dual watch channel will be watched
alternately. If either channel becomes active the watch cycling will stop and the receiver
will be enabled. When this mode of operation is selected the ‘DW’ icon will be displayed.
6. Key Lock: A long press for greater than 1.5 seconds of the Volume
Down button will lock the keypad except for the PTT button, Power button and
the backlight function. A Key Lock icon will be displayed. A long press for greater
than 1.5 seconds of the Volume Down button will release the key lock.
Parameters:
Function Power Up Defaults Manual Power On Range
Channel 1 No change 1 to 8
CTCSS channel Null No change Null, 1 to 38
CDCSS channel Null No change Null, 1 to 83
Vox sensitivity Null No change Null, 1 to 3
Vox time 1 No change 1 to 5
Dual watch channel Null Null Null, 1 to 8
Compander OFF No change ON/OFF
PC Programmable Features:
1. Channel Frequencies:
2. RF Output power select 0.5/1 watt
3. CTCSS/CDCSS code selections:
4. VOX sensitivity.
5. VOX time.
6. VOX ON/OFF
7. Dual watch selection.
8. Dual watch/All Scan select.
9. Compander ON/OFF
10. Battery Save ON/OFF