User's Manual

To insert the battery:
1.
Slide the battery door open.
2.
Insert the lithium battery into the battery compartment, making sure the polarities
(+ and –) match.
3.
Slide the back cover and clip into place.
WARNING: There is a danger in which incorrectly placing the battery can cause an
explosion. Always make sure the radio is switched off before installing or changing
the battery. Replace only with the same or equipment type. Use ONLY with lithium 3.7V
830mAH rechargeable battery. Contact Advanced Wireless Communications at
1-800-475-5852 or www.adavncedwireless.com for more information.
6
GETTING STARTED
INSTALLING / REMOVING / CHARGING THE BATTERY
To charge the battery using 6 gang charger:
IMPORTANT:
Charge the battery for 12 hours on the first charge. After that, it should
take 4 or less hours to charge.
Make sure the adapter is not obstructed and is easily accessible to the unit.
1) Connect 6 gang charger to AC power using DC adaptor provided.
2) Slide switch to select CHG.CHG-CLON
3) Insert radio unit into 1 docking cradle (insert additional radio units into docking
cradles, 2 through 6). Please ensure radio screen faces forward (same direction
as LED lights on gang charger).
st
Battery Status
Extra Batteries LED
Radio screen
Battery charging
Battery charged
Red
Green
LCD backlight on
LCD backlight off