User's Manual

Press and hold

until you hear a beep and the LCD display appears or disappears.

TURNTHEUNITON/OFF

To turn the unit ON or OFF:

To change the volume level:

Use

or to increase or decrease volume.

VOLUME

NOTE:

To completely disconnect from power, the adapter should be disconnected from the

6-Ganged Charger.

Batteries should not be exposed to excessive heat such as sunshine or fire.

To maintain the battery life of your two-way transceiver it is recommended that you only

charge the battery when needed. Overcharging the battery will reduce performance.

The 6-Ganged Charger and adapter should not be exposed to wet conditions. No

with liquid, such as vases, should be placed on the main unit and adapter.objects filled

For best results ensure that the unit is turned off before charging.

Remove batteries before storing your radio for extended periods. Batteries corrode

over time and may cause permanent damage to your radio.

For best transmission speak about 2 away from the radio and leave a short pause

before speaking once you have pressed

To talk to another transceiver:

The transceiver will automatically play received transmissions.

NOTE:

You can only communicate with another transceiver that is on the same channel

and using the same CTCSS/DCS code as your transceiver.

1. Press and hold “ ” to check if the channel is free.Mon

TALK TO ANOTHER TRANSCEIVER

2. Press and hold and speak into the microphone to transmit.

3. Release once you have finished speaking to allow other radios to respond.