User's Instructions

ManualsBrandsAdvanced Wireless Communications ManualsComputers & AccessoriesDigital Repeater

To user

Thanks!

Digital repeater (is briefly referred to as repeater below), use the high performance radio

frequency module, Control panel, Power supply module and Built-in duplexer (Optional),

designed as 50w professional repeater.

Repeater use the modular design, with high performance and easy to maintain, convenient to

update and the interface opening features.

Repeater main functions are wireless transfer, support local PTT calling and support

expanding function, is convenient for users to add other communication functions, which will

bring a lot of convenience for your work and life.

Repeater use the most advanced and superb technology hope our quality will satisfy you.

Contents

USER INSTRUCTIONS ················································································· 2

SAFETY PRECAUTIONS ··············································································· 3

OOBA ·············································································································4

PRODUCT INTRODUCTION ·········································································· 4

FRONT PANEL INTRODUCTION

·········································································· 4

PANEL INTRODUCTION ···················································································· 4

FUNCTION INTRODUCTION ··············································································5

REPEATER

OPERATION ··············································································· 8

TURN ON/TURN OFF REPEATER ·········································································8

INDICATATION

OF TRANSIT···············································································8

SOFTWARE OPERATION ··················································································9

PANEL KEY OPERATION AND DIGITAL DISPLAY ················································· 9

PANEL OPERATION

····················································································· 12

OVERALL FRAMEWORK····························································································12

SET UP DISPLAY ·································································································· ··

PASSWORD AUTHENTICATION··················································································· 16

SHORTCUTS

····································································································· 16

TROUBLESHOOTING GUIDE ········································································ 16

Summary of content (19 pages)

PAGE 1
To user Thanks! Digital repeater (is briefly referred to as repeater below), use the high performance radio frequency module, Control panel, Power supply module and Built-in duplexer (Optional), designed as 50w professional repeater. Repeater use the modular design, with high performance and easy to maintain, convenient to update and the interface opening features.
PAGE 2
User instructions ◆ Would you please read this manual carefully before using this product, so that you can more easily handle the operation of this machine. When you use this product, we think that you have read the instructions already.。 ◆ Please carefully keep this instruction for future reference. ◆ In order to safeguard the legitimate rights and interests of you, so please seriously truthfully fill in the user's warranty Card " when buying our products, and ask for the purchase vouchers.
PAGE 3
Safety Precautions For the safety and effectiveness of your operation, please read bellow information carefully. ◆High voltage and high temperature, be careful for electric shock and burn ◆Maintenance work must be professionals and technicals, don’t dismounting. ◆Setting and install must be approved of the radio administrative department. ◆Repeater has the ground terminal, which should be carefully ground for the safety and performance of the machine.
PAGE 4
OOBA Please be careful when open the packing box，confirm whether has goods inside of the box, if you find something miss or been damage, please contact dealer. Item No.
PAGE 5
Indicator Color Functional description TX green Always on, the repeater is transmitting signals RX green Always on, the repeater is receiving signals LNK green Always on, the link is successful ERROR red On or flashes, error occured DC green Always on, DC power supply equipment POWER green TS B transmit A、B green Digital time slot one receive signal, A light on. Digital time slot two, B light on. Analog doesn’t light.
PAGE 6
F4/v+ 1.Function key 4 (software defines) 2.
PAGE 7
Power supply interface and large switch picture Rear panel port introduction Port name Function declaration USB Connect with PC，use ain programming、software update。 EXT-I/O Outside expand interface, including the signal connected with outside and control the Pin, use as specific expanding function. Outside look structure define the interface. RJ11 Connect with PSTN telephone network or PABX internal telephone network, use as expanding interworking call with telephone network.
PAGE 8
Pin8 EXT__IO_UF_OUT Extend AF output Pin9 EXT__ Ext_MIC Pin10 +13v 12V_OUT 500mA_max Pin11 IO_DX DATAR peripheral equipment information Pin12 IO_FSX FSR sync output Pin13 IO_CLKR Pin14 Ext_BOOT0 Guidance enabled Pin15 DG Digital Pin16 AG Analog Pin17 NDET_OUT Expanding port (output) Pin18 NDECT_IN Expanding port (input) Pin19 UART3_TX UART3_TX serial port Pin20 O_PTTO PTT output Pin21 IO_DR DATAR peripheral equipment voice data Pin22 IO_FSR FSR signal lock input Pi
PAGE 9
Panel key board and display Key and Display Key tone 1. Operate to modify working parameter and operate optional menu key, once “beep” informed. 2. Operate parameter error and operate invalid, continual short “beep” sound informed.
PAGE 10
a) Calling settings: according need to set whether opening call for or not, default yes: available for call in or call out. b) Call in password: when others call the repeater telephone number, they will need to input this password. c) Call out password: when you need to call others telephone number, you need to input this password. d) Hang up password: when the calling is over, the repeater need to input this pasword to hang up. e) Embedded password: The repeater default calling out number.
PAGE 11
for example, the embedded number is 075526000000, firstly, press the PTT button, input 222# on keyboard, then release PTT, after a few seconds you can have a call with 075526000000. 2 Handsets (repeater) answer the call (the call in password is :111 ) ○ If other side use the plane or phone to call the handsets (repeater), after get through you need to input call password+#(111#), then you can have a call.
PAGE 12
Panel operation Holding state When the device start to work, the panel enter holding state, and will display current channel number, the picture below is channel number 8.
PAGE 13
3) Press before will remove the password number you input. 4) In any menu press , the device will enter password lock up state and holding state. 5) Long time (more than 30 seconds) no button been press, the device will enter password lock up state and holding state.
PAGE 14
4) Press again back to P1 menu interface. Power regulation In the P1 interface, press press to enter power regulation menu option, digital display “P2”, back to P1 interface, press to enter power regulation set up operation interface, the process like below: 1) Digital tube alternately display current power level L1 to L9 and current level power value, “L1” responding to 5W, “L9” responding to 45W, the picture below shows the current power level is level 6, the input power is 30W.
PAGE 15
the detailed process please refer to the “Password Authentication” 2) After the password authentication pass, will have a tone mean you are correct, then you can start to set your new password. 3) Press any combination of press , set new six figures password, and then to confirm.
PAGE 16
Troubleshooting guide Description Boot problem Reason 1. The power cord is in poor contact. 2. The power cord is broken. 3. The fuse of power supply and insurance board are broken. 4. Switching power supply failure frequency 1. Control line is broken failed to Write software connect Failed to set up a call Solution 1. Re-plug the power cord 2. Replace the power cord 3. Replace the fuse 4. Replace the switching power supply 1. Replace control line. the 1. Frequency of 1.
PAGE 17
3. 4. 5. Communication 1. Antenna head be 1. Distance become watered shorter 2. Antenna is in poor connection 3. Frequency disruption 2. 4. Repeater transmit power decrease 3. 5. Receive module sensitivity decrease 4. 5. the channel parameter frequency of the diplexer. Replace the receive module Replace the stimulus module Replace the control panel. Examine the antenna head, use the waterproof daub Replace the antenna. Find out the frequency disrupted or change. Replace the power amplifier module.
PAGE 18
When the repeater have some error, the error light will light up, the speaker will have a warning alarm, the digital tube will show the fault code. After the warning occur, firstly, check if the communication is OK, if don’t, restart the repeater, if still not work, please contact with the dealer around you. The fault code as below: Alarm item Alarm class 0.not detected RF power amplifier RF power 1.E2PROM fault amplifier 2.RF power amplifier fault 3.RFpower amplifier overheat 4.
PAGE 19
fault range amplifier module, duplexer parameter 2. Receive Receive module 02 frequency is over parameter range 3. Board-band, Stimulus module 03 narrow-band parameter, receive module parameter 4. Transmit power Power module, 04 is over range duplexer parameter FCC Compliance Notice This device complies with part 15 of the FCC Rules.