User's Instructions

4) Press again back to P1 menu interface.
Power regulation
In the P1 interface, press to enter power regulation menu option, digital display “P2”,
press back to P1 interface, press to enter power regulation set up operation
interface, the process like below:
1) Digital tube alternately display current power level L1 to L9 and current level power value,
“L1” responding to 5W, “L9” responding to 45W, the picture below shows the current power
level is level 6, the input power is 30W.
2) Press or to decrease or increase the power level, digital tube alternately display
new level “L1 to L9” and responding power value.
3) Press to confirm, digital display stop shining, the value will be saved in the device,
and become effective when the next profession comes, press to cancel the operation.
4) Press to cancel the operation.
Password changing
In the P2 interface, press to enter password changing menu interface, the digital tube
shows P3, you need verify old password before you change password, after the verification
pass through, you can changing the password, and the default factory password is “1 1 1 1 1
1”, the process like below:
P3
1) Press , firstly, password authentication, the digital tube shows and shining,