User`s manual

7. AUXILIARY FUNCTIONS
TRANSMITTING [PTT]:
■ Press PTT and speak to the microphone to
make a call, the LED lights red.
■ If this channel is empty or not programmed
into the radio the warning tone sounds and
does not light red.
■ Release PTT to listen. If there is a signal,
LED lights green and turn on the speaker.
VOX FUNCTION
When the radio is set at any channel, turn off
the power rst, meanwhile press PTT button
and power key for 3 seconds. After hearing the
tone of opening radio and two beep sounds, re-
lease PTT button and power key, then the radio
enter into VOX opening mode.
Note: A VOX headset is required for VOX
operation.
CHANNEL SCAN / PRIORITY SCAN
The MINI PRO two-way radio can be
programmed with either common or priority
scan functions.
To use the Scan function press the Scan button
for 1 second to enable or disable it. A single
beep indicates that scan has been enabled.
A double beep indicates that scan has been
disabled.