Installation Guide

INSTALLING
AWNING ONTO
BRACKETS
12
INSTALLATION
Remove the bolts on
the front of the wall
brackets.
Slide torsion bar into
the square section of
the bracket.
Place retaining bolt
into the bracket
and use the nut and
washer to secure bolt
into place.
Tighten the bolt with
a socket wrench.
Fig 31 Fig 32
Fig 33
Place brackets over
the appropriate
holes.
Using a washer and
a lag screw, secure
the brackets to the
surface until snug.
Toll Free (US): [phone] www.advaning.com
Washer
Lag screw
Socket wrench
Washer
Retaining
bolt
Nut
Torsion bar
Bracket Bracket
6
6
7
7
1
1
2
2
3
3
4
4