Use and Care Manual

12
Washer
Retaining
bolt
Nut
Socket wrench
INSTALLATION
Fig 31
Fig 33
INSTALLING
AWNING ONTO
BRACKETS
Remove the bolts on
the front of the wall
brackets.
Slide torsion bar into
the square section of
the bracket.
Place retaining bolt
into the bracket
and use the nut and
washer to secure bolt
into place.
Tighten the bolt with
a socket wrench.
Place brackets over
the appropriate
holes.
Using a washer and
a lag screw, secure
the brackets to the
surface until snug.
Toll Free (US): [phone] www.advaning.com
Washer
Lag screw
Bracket Bracket
Torsion bar
1
1
2
2
3
4
6
7
6
7
3
4