Installation Guide

7
INSTALLATION
Fig 9
Fig 10
Fig 11 Fig 12
Standard stud
installation
INSTALLING WALL
BRACKETS
Measure and mark
where the top of your
awning bracket will
be placed.
Use a regular level
and chalk line or a
laser level, mark a
straight level line.
Locate and mark the
center of the wall
studs along this line
using a stud nder.
*Please follow the
directions of your stud
nder as instructed
by the manufacturer.
Align the top of the
bracket to the chalk
line.
Align the center of
the bracket mounting
holes with the center
of the stud.
Use a level to make
sure the bracket is
straight and mark
the center of the
mounting holes.
Drill mounting holes
using a drill bit.
CAUTION: Install the
bracket onto wall studs
based on the recom-
mended bracket location
(see page 5).
www.advaning.com Toll Free (US): [phone]
Stud nder
Level
Marker/pencil
1
Minimum
10 feet
1
Minimum 1 inch
Bracket
Center of stud
Wall
3.5”
Level
Chalkliner
2
3
4
5
6
7
Marker/pencil
1
2
3
4
5
6
7