Installation Guide

7
INSTALLATION
Fig 9
Fig 10
Fig 11 Fig 12
Standard stud
installation
INSTALLING WALL
BRACKETS
Measure and mark
where the top of your
awning bracket will
be placed.
Use a regular level
and chalk line or a
laser level, mark a
straight level line.
Locate and mark the
center of the wall
studs along this line
using a stud nder.
*Please follow the
directions of your stud
nder as instructed
by the manufacturer.
Align the top of the
bracket to the chalk
line.
Align the center of
the bracket mounting
holes with the center
of the stud.
Use a level to make
sure the bracket is
straight and mark
the center of the
mounting holes.
Drill mounting holes
using a drill bit.
CAUTION: Install the
bracket onto wall studs
based on the recom-
mended bracket location
(see page 5).
www.advaning.com Toll Free (US): [phone]
Stud nder
Level
Marker/pencil
1
Minimum
10 feet
1
Minimum 1 inch
Bracket
Center of stud
Wall
3.5”
Level
Chalkliner
2
3
4
5
6
7
Marker/pencil
1
2
3
4
5
6
7