Operation Manual

Installation and Operation Manual S400 series 8
2.1. Powering on
The MULTI S400 display does not include an integrated switch. The unit is powered by a 12 V
DC supply on the red (+) and black (-) wires. When stopped, all settings are memorized.
2.2. Operation in normal mode
2.2.1. Selecting information on the upper display
The key is used to select various data in the upper line. Key operation:
2 General operation
Depth
DEPTH
Speed over ground (if connected to a GPS)
SOG
Boat speed
SPEED
Average speed
AVG SPEED
Max speed
MAX SPEED
Temperature
TEMP