Instruction manual

Maximum Series Portable Chiller : Air & Water-Cooled : M1 Series Instrument
Page: 35
ADVANTAGE ENGINEERING, INC.
525 East Stop 18 Road Greenwood, Indiana 46142
317-887-0729 Fax: [phone]
Service Department Fax: [phone]
Email: [e-mail]
3. LOW PRESSURE GAUGE: Indicates refrigerant pressure
on the suction side of the compressor. This pressure will
uctuatewiththeprocesstemperature.
3.4 SHUT DOWN/DISCONNECT SEQUENCE
A. PRECAUTIONS/WARNINGS
1. The operator must follow all shut down procedures outlined
in this manual. If the operator fails to follow all procedures
outlined in this manual, an unsafe condition can develop
resulting in damage to the unit or personal injury.
B. UNIT SHUT DOWN
1. To shut down the unit without disconnecting from the
process:
a. Move the ON / OFF switch to the off position.
2. To shut down the unit and disconnect from the process:
a. Move the ON / OFF switch to the off position.
b. Disconnect all process lines.
WARNING: Relieve static pressure before disconnection process lines.
WARNING: Follow all shut down procedures outlined in this manual.