Instruction manual

Maximum Series Portable Chiller : Air & Water-Cooled : M1 Series Instrument
Page: 60
ADVANTAGE ENGINEERING, INC.
525 East Stop 18 Road Greenwood, Indiana 46142
317-887-0729 Fax: [phone]
Service Department Fax: [phone]
Email: [e-mail]
G. CONDENSER SCREEN: Optional
for air-cooled models only. The
condenserscreenisalterforthe
air-cooled condenser to prevent
air borne solids and debris from
clogging the condenser. Use non
restrictiveltermaterialwithaMERV
rating of 2 - 3.
H. ADVANTAGE ‘LE’ INSTRUMENT:
The “LE” instrument control offers
additional temperature monitoring,
machine status and diagnostic
capability. Network communication
is available. Not available with M1D
units.
I. ADVANTAGE ‘HE’ INSTRUMENT:
The “HE” instrument control offers
fully advanced temperature
monitoring, capacity display,
owdisplayandmachinestatus.
Unique “Go - No Go” diagnostic
lights show current and past
operating status. Network
communication is available.
Not available with M1D units.
J. REVERSE FLOW PIPING: Reverseowchillersaredesigned
specicallyforopen circuitprocesses.Noticethattheowcircuit
remains basically the same, but the process acts as the chiller
reservoir, and gravity returns water to the pump suction. System
water make-up and level control is accomplished externally at the
process since the chiller contains no reservoir.
Typical Condenser Screen.
LE Instrument Controller.
HE Instrument Controller.