Installation Manual

PARTS INCLUDED IN YOUR KIT.
You may want to lay them out in
this manner for accessibility.
NOTE any damaged or missing parts?
Parts will be shipped to you directly.
Call 800-773-3110, Mon - Fri 8:30 am - 5 pm EST
Part# SF0016 0613 RRE Printed in USA
INSTALLATION SHEET
Remove paper
tape from all rails.
Discard properly.
Foam has NO adhesive
to touch truck finish.
Wash truck bed.
1
2
3
4
Allen Wrench
Clamp Bolts
Tarp
Corner Pieces
“DOUBLE HOOK”
Side Rail Clamps
*
Off the truck bed, connect the
end rails to the two side rails
utilizing the lock clips.
Cab Rail
Tailgate Rail
Side Rails
Spring Bows
(x3-Short Bed)
(x4-Long Bed)
ADVANTAGE • 1901 E. Ellsworth, Ann Arbor, MI 48108 • 734-926-2370 • Fax: 734-477-0224 • www.AdvantageTruckAccessories.com
“U” Shaped Clamps
Note: LONG BED
trucks have 8 clamps
*
Place the rail assembly
over the side of the
truck box. Center rails
evenly between cab
and tailgate.
NOTE: Some applications have
rubber risers (rectangular rubber
pads). A riser must go toward
tailgate. Some applications will
have a riser at both ends, (most
have no riser).
*Clamp styles may vary for some truck applications
SEE CHART BELOW
SPECIAL CLAMP
INSTRUCTIONS
Chevy Stepside (88-99): use 5A & 6A
Chevy Stepside (99): use 5B & 6B
Ford F150 Flareside (04-08): use 5C & 6C
Ford F150 Flareside (97-03): use 5D
Ford F150 Flareside (92-96): use 5E & 6E
Ford F150 SuperCrew (01-03): use 5F & 6F
Ford Sport Trac: use 5G
Trucks w/ Factory Rail Systems use H

Summary of content (14 pages)