I-200 integrated power amplifier users and maintenance guide
I-200 Operations Manual TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. TO AVOID ELECTRICAL SHOCK, DO NOT OPEN THE UNIT’S CASE. THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL ONLY. THIS SYMBOL IS INTENDED TO ALERT YOU TO THE PRESENCE OF UNINSULATED, DANGEROUS VOLTAGE WITHIN THE UNIT’S CASE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK.
I-200 Operations Manual Thank you for purchasing the ADVANTAGE I-200 integrated amplifier. Your I-200 is a state-of-the-art unit, and has been assembled by highly skilled ADVANTAGE craftsmen to provide you with many years of listening pleasure. We encourage you to read this manual carefully, and to follow the safety and operating instructions within.
I-200 Operations Manual “BURN-IN” Due to the extremely short signal paths designed and built into this piece of equipment, a significant “burn-in” period is required before the unit will reach its maximum sonic potential. We recommend the unit be left on (or in standby mode) at all times, especially during the first 5-6 weeks of operation, in order to speed the “burn-in” process.
I-200 Operations Manual I-200 integrated power amplifier users and maintenance guide 4
I-200 Operations Manual Front Panel…………………………………………………..6 Remote Control…………………………………………..7&8 Rear Panel…………………………………………………..
I-200 Operations Manual The front panel of the ADVANTAGE I-200 integrated amplifier contains only the display window to indicate the current status of the unit. All functions and programming features of the I-200 are accessed through the remote control.
I-200 Operations Manual 1.Standby Switches the unit between operational and standby modes, and, if other ADVANTAGE products are connected via the data bus, these will also be switched into the standby mode. 2 & 3. STEP (+ and -) To select the current input source to your I200, the step buttons are used to switch between the two balanced and five unbalanced inputs as shown on the display. 4 & 5. REC (+ and -) Not used for I-200. Record out has the same source as main out. 6 & 7.
I-200 Operations Manual To set the I-200 surround sound mode, press the SURR(OUND) button and select the input (from the menu) that you have dedicated for the use of your surround sound processor. 14. EXT Your I-200 remote control may also be used to control other ADVANTAGE products through the use of the external data communication jacks located on the rear of the unit. When connected via the data bus, each unit will automatically detect the others presence.
I-200 Operations Manual 8 7 1 2 3 4 5 6 1. Speaker terminals 2. Tape Out (Recording) 3. Unbalanced Inputs (Lines 1-5) 4. Balanced Inputs 5. Data Buss Connectors 6. Fuse Access Hatch 7. Mains Plug 8.
I-200 Operations Manual 1. The I-200 integrated amplifier functions best when placed on a flat, stable surface. 2. Never place the I-200 near heat sources such as radiators, stoves, fireplaces or other heat-producing appliances. Avoid placing the I-200 where it will be subjected to direct sunlight or extremely low temperatures. 3. To clean the unit, use only a soft tissue (Kleenex brand). Never apply abrasive cleaners to the outer surfaces of the unit. 4.
I-200 Operations Manual Contact your authorized ADVANTAGE dealer for details of our warranty policy. All service on this equipment must be performed by an authorized ADVANTAGE repair facility.