User manual

ACP-4320 User Manual 12
5. Refer to Figure 2.2, place the motherboard into the chassis, and fix it
with screws.
6. Plug in the 20- or 24-pin ATX power connector and +12 V power con-
nector from the power supply.
7. Connect the wires for the POWER switch, RESET switch, and the
front USB from the motherboard to the front panel of the chassis.
8. Connect the wires for the POWER LED, HDD LED and LAN LED
from the motherboard to the small LED board, which is attached to the
front panel of the chassis.
Figure 2.2: Installing a motherboard
Note: All Advantech's industrial ATX/microATX moth-
erboards support the front USB function. How-
ever, only the AIMB-750, 760, 762, 560 and the
later industrial motherboards support the front
LAN LED function.