User manual

2.5.4 Installing a SAS/SATA HDD in the front-accessible HDD tray

ACP-4320 accepts both SAS and SATA HDDs. It is not necessary to

remove the top cover when installing a SAS or SATA HDD in any of the

front-accessible HDD trays.

1. Left-shift the key latch of one HDD tray to unlock the tray. Hold the

handle of the tray and draw it out from the chassis.

2. Refer to Figure 2.6 and slide one hard disk drive into the proper loca-

tion in the tray and fix it with 4 ~ 6 screws.

Figure 2.6: Installing a SATA HDD

3. Return and push the HDD tray into the chassis until the handle of tray

is moving back. Right-shift the key latch of the HDD tray to lock the

tray.

4. Repeat Steps 1 to 3 if there is a second SAS or SATA HDD to be

installed.