User manual

ACP-4320 User Manual iv
15. DO NOT LEAVE THIS EQUIPMENT IN AN UNCONTROLLED
ENVIRONMENT WHERE THE STORAGE TEMPERATURE
IS BELOW 0°C (32°F) OR ABOVE 40° C (104° F). THIS MAY
DAMAGE THE EQUIPMENT.
16. CAUTION: The computer is provided with a battery-powered
real-time clock circuit. There is a danger of explosion if battery
is incorrectly replaced. Replace only with same or equivalent
type recommended by the manufacture. Discard used batteries
according to the manufacturer’s instructions.
17. THE COMPUTER IS PROVIDED WITH CD DRIVES COMPLY
WITH APPROPRIATE SAFETY STANDARDS INCLUDING
IEC 60825.
18. This device complies with Part 15 of the FCC rules. Operation is
subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
19. CAUTION: Always completely disconnect the power cord from
your chassis whenever you work with the hardware. Do not
make connections while the power is on. Sensitive electronic
components can be damaged by sudden power surges.
20. CAUTION: Always ground yourself to remove any static charge
before touching the motherboard, backplane, or add-on cards.
Modern electronic devices are very sensitive to static electric
charges. As a safety precaution, use a grounding wrist strap at all
times. Place all electronic components on a static-dissipative sur-
face or in a static-shielded bag when they are not in the chassis.
21. CAUTION: Any unverified component could cause unexpected
damage. To ensure the correct installation, please always use the
components (ex. screws) provided with the accessory box.