User's Manual
Table Of Contents
- ADAM-2000 Series
- 1 Understanding Your System
- 1.1 Introduction
- Figure 1.1 ADAM-2000 Series System Architecture
- Figure 1.2 ADAM-2000 Series Outdoor Range Distance
- 1.1.1 IEEE 802.15.4 Wireless Standard
- 1.1.2 Wireless Sensor Network
- 1.1.3 Low-power Consumption and Battery-Powered Design
- 1.1.4 Sensor Embedded Design
- 1.1.5 Wireless Signal Indicator
- 1.1.6 Industrial Standard Modbus Protocol
- 1.1.7 SCADA Software Support
- 1.1.8 Advantech Software Alignment
- 1.2 Specifications
- 1.3 Dimensions
- 1.4 Mounting
- 1.5 Wiring & Connections
- 1.1 Introduction
- 2 Selecting Your Hardware
- 3 Installation Guide
- 4 Software Configuration Guide
- 4.1 System Software Configuration Utility
- 4.2 Installing ADAM.NET Utility Software
- 4.3 ADAM.NET Utility Operation
- Figure 4.1 ADAM.NET Utility Operation Window
- Figure 4.2 ADAM.NET Utility Toolbar
- 4.3.1 Search and Configure the ADAM-2000 Series
- Figure 4.3 ADAM-2000 Series ADAM .NET Utility Support
- Figure 4.4 Search the USB interface ADAM-2000 devices on the host PC for the virtual COM port.
- Figure 4.5 Search the COM port for the ADAM-2000 devices.
- Figure 4.6 Searching the network dialog
- Figure 4.7 Searching the ADAM-2000 coordinators.
- Figure 4.8 ADAM-2000 devices lists on the Tree View and Information page.
- Figure 4.9 The overview of ADAM-2000 end devices.
- Figure 4.10 The overview of ADAM-2000 routers
- 4.3.1.1 Gateway - ADAM-2520Z
- 4.3.1.2 Router - ADAM-2510Z
- 4.3.1.3 End Device - ADAM-2017, ADAM-2031Z, ADAN-2051Z, ADAM-2051PZ
- Figure 4.16 Information Page of ADAM-2051Z
- Figure 4.17 Wireless Configuration page of ADAM-2051Z
- Figure 4.18 The Device Status page of the ADAM-2051Z
- Figure 4.19 The Signal page of the ADAM-2051Z
- Figure 4.20 Information Page
- Figure 4.21 Wireless Configuration Page
- Figure 4.22 Device Status Page
- Figure 4.23 Sensor Page
- 4.3.2 Network Topology of ADAM-2000 Series
- A Module Introduction
- B ADAM-2000 Series Functions
- C Troubleshooting
- 1 Understanding Your System
ADAM-2000 Series User Manual 32
Toolbar
There are 7 graphical icons on the toolbar for 7 common used options of Menus. Fig-
ure 5.2 below shows definition for each graphical icon.
Figure 4.2 ADAM.NET Utility Toolbar
Module Tree Display Area
ADAM.NET Utility is one complete software tool that all ADAM remote I/O module
and controller can be configured and operated in this utility. The Module Tree Dis-
play is on the left part of the utility operation window. There are five categories in the
Module Tree Display Area:
Serial
All serial I/O Modules (ADAM-4000 and ADAM-5000 RS-485 serial modules)
connected to the host PC will be listed in this category.
Ethernet
All Ethernet I/O Modules (ADAM-6000 and ADAM-5000 TCP modules) con-
nected to the host PC will be listed in this category.
ADAM-4500_5510 Series
This is a DOS interface utility for remote controllers such as ADAM-4500 and
ADAM-5510 series.
Favorite Group
You can define which devices listed in the three categories above into your per-
sonal favorite group. This will make you easier to find your interested modules.
Right click on the ADAM device item under the Favorite Group item and you can
select New >> Group to create a new group. After you create your own group,
right click on your group and select New >> Adam device to add ADAM
devices into your group. You can also select Diagnose connection to check
the communication.
Wireless Sensor Networks
The category contains the WSN-4000 and ADAM-2000 series. You can connect
the WSN-4000 and ADAM-2000 series, through the serial interface. The WSN-
4000 and ADAM-2000 series will be listed for further configuration.
Status Display Area
Status Display area, on the right part of utility operation window, is the main screen
for operation. When you select different items in Module Tree Display, Status Dis-
play will change dependently. You can do all configurations and test in this area.
Open Favorite Group
Save Favorite Group
Search Modules
Add Devices to Group
Terminal for Command Testing
Monitor Stream/Event Data
Print Screen