User manual

ADAM-6541 User Manual 10
DIN-rail Mounting
You can mount the ADAM-6541 on a standard DIN-rail. First, using two
screws, attach the metal plate to the DIN-rail bracket. Because the screw
heads are beveled, the tops of the screws will be flush with the metal
plate. Din-rail Mounting Brackets-Orientation of Metal Plates: A more
convenient way is to screw the metal plate with the DIN-rail bracket
assembly to the bottom of the server. Next, use the remaining screws to
put the metal plate on the bottom of the ADAM-6541.
Figure 2.4: Din Rail Mounting