User Manual AIMB-203 Intel® Core™ i7/i5/i3/Pentium/ Celeron LGA1150 Mini-ITX with CRT/LVDS/DP++/DVI-D, 9 COM, 8 USB, Dual LAN, PCIe x16
Copyright The documentation and the software included with this product are copyrighted 2014 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable.
A Message to the Customer Advantech Customer Services Each and every Advantech product is built to the most exacting specifications to ensure reliable performance in the harsh and demanding conditions typical of industrial environments. Whether your new Advantech equipment is destined for the laboratory or the factory floor, you can be assured that your product will provide the reliability and ease of operation for which the name Advantech has come to be known. Your satisfaction is our primary concern.
Declaration of Conformity FCC Class B This device complies with the requirements in part 15 of the FCC rules: Operation is subject to the following two conditions: This device may not cause harmful interference This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Memory Compatibility Brand Size Speed Type ECC Vendor PN Memory Transcend 1GB DDR3 1066 SODIMM DDR3 N TS128MSK64 V1U SEC K4B1G0846G- PASS BCH9 Transcend 2GB DDR3 1066 SODIMM DDR3 N TS128MSK64 V1U SEC HCH9 K4B1G0846D (128x8) Transcend 4GB DDR3 1066 SODIMM DDR3 N HYNIX TS7KSN28420 H5TQ2G83BF PASS -1Y R (256x8) Apacer 4GB DDR3 1066 SODIMM DDR3 N HYNIX 78.B2GC8.
N HYNIX D3SH56082XH H5TQ2G83BF PASS 15AA R (256x8) N SEC 113 D3SS56081XH HCK0 12AA K4B2G0846C (256x8) PASS SODIMM DDR3 N SEC 113 D3SS56082XH HCK0 12AA K4B2G0846C (256x8) PASS DDR3 1333 SODIMM DDR3 N ELPIDA D3SE1208XL1 J4208EBBG5AB GN-F PASS 8GB DDR3 1600 SODIMM DDR3 N ELPIDA D3SE1208XL1 J4208EBBG2AA GN-F PASS Apacer 2GB DDR3 1600 SODIMM DDR3 N HYNIX 78.A2GCJ.AF0 H5TQ2G83CF PASS 0C R (256x8) Apacer 2GB DDR3 1600 SODIMM DDR3 N MICRON 78.A2GCR.
Ordering Information P/N Chipset DP++ CRT DVI-D LVDS GbE LAN COM SATA USB3 MiniPCIe III / II .0/2.
Initial Inspection Before you begin installing your motherboard, please make sure that the following materials have been shipped: 1 x AIMB-203 Intel Core™ i7/i5/i3 LGA1150 Mini-ITX motherboard 2 x SATA HDD cable 2 x Serial port cable 1 x I/O port bracket 1 x Startup manual 1 x Driver CD 1 x Warranty card If any of these items are missing or damaged, contact your distributor or sales representative immediately.
Contents Chapter 1 General Information ............................1 1.1 1.2 1.3 1.9 1.10 1.11 1.12 Introduction ............................................................................................... 2 Features .................................................................................................... 2 Specifications ............................................................................................ 2 1.3.1 System .............................................................
2.25 2.26 2.27 Table 2.1: LAN LED Indicator.................................................... 16 DVI-D(Up) and VGA(Down) connector (VGA1+DVI1) ............................ 17 Serial Ports (COM1~COM9) ................................................................... 18 PS/2 Keyboard and Mouse Connector (KBMS1).................................... 19 CPU Fan Connector (CPU_FAN1) ......................................................... 19 System FAN Connector (SYSFAN1/2) ..................................
5.3 Windows 7/8 Driver Setup....................................................................... 77 6 VGA Setup ..........................................79 6.1 6.2 Introduction ............................................................................................. 80 Windows 7/8............................................................................................ 80 7 LAN Configuration.............................81 7.1 7.2 7.3 7.4 Introduction ......................................
A.43 A.44 AIMB-203 User Manual System Fan2 Connector (SYSFAN2) ................................................... 109 SIM Card Holder (SIM2) .......................................................................
Chapter 1 1 General Information
1.1 Introduction AIMB-203 is designed with the Intel® H81 for industrial applications that require both performance computing and enhanced power management capabilities. The motherboard supports Intel desktop Core i7-4770S 3.1GHz / Core i7-4770TE 2.3GHz / i54570S 2.9GHz / i5-4570TE 2.7GHz / i3-4330 3.5GHz / i3-4330TE 2.4GHz / Pentium G3420 3.2GHz / Pentium G3320TE 2.3GHz / Celeron G1820 2.7GHz / Celeron G1820TE 2.2GHz processor up to 8 MB L3 cache and DDR3 SO-DIMM 1333/1600 up to 16GB.
Controller: Intel® Gfx Gen 7.5, HD graphics Display memory: 1 GB maximum shared memory with 2GB and above system memory installed VGA: Supports VGA up to resolution 1920 x 1200 @ 60 Hz refresh rate LVDS: Supports LVDS up to resolution 1920 x 1200 Displayport1.
1.4 Jumpers and Connectors Connectors on the AIMB-203 motherboard link it to devices such as hard disk drives and a keyboard. In addition, the board has a number of jumpers used to configure your system for your application. The tables below list the function of each of the board jumpers and connectors. Later sections in this chapter give instructions on setting jumpers. Chapter 2 gives instructions for connecting external devices to your motherboard. Table 1.
JCMOS1 39 Power LED and keyboard lock pin header JFP2 40 Power switch/HDD LED/SMBus/Speaker pin header JFP1 41 CPU FAN connector CPUFAN1 42 DDR3 SO-DIMM socket DIMMA1 43 DDR3 SO-DIMM socket DIMMB1 44 System fan1 connector SYSFAN1 45 System fan2 connector SYSFAN2 46 SIM Card holder SIM2 Table 1.
1.5 Board layout: Jumper and Connector Locations Figure 1.
PCIe x 16 Intel Core i7/i5/i3/ Pentium/Celeron processor Display port LVDS 24/48 bit CRT CRT 2 SATA 3 PORTS SATA 3 1 SATA 2 Port SATA 2 6 USB Ports USB 2.0 2 USB Ports USB 3.
1.8 Jumper Settings This section provides instructions on how to configure your motherboard by setting the jumpers. It also includes the motherboards's default settings and your options for each jumper. 1.8.1 How to Set Jumpers You can configure your motherboard to match the needs of your application by setting the jumpers. A jumper is a metal bridge that closes an electrical circuit.
Table 1.5: COM1_RI# Pin RI#/5V/12V selection (JSETCOM1_V1) Function Setting Chapter 1 1.8.4 COM1_RI# Pin RI#/5V/12V selection (JSETCOM1_V1) Set COM1_RI# as RI# (Default) General Information Set COM1_RI# as 5V Set COM1_RI# as 12V 1.8.5 COM2_RI# Pin RI#/5V/12V selection (JSETCOM2_V1) Table 1.
1.8.6 COM5 RS232,RS422,RS485 selection pin header (JSETCOM5) Table 1.
Chapter 1 1.8.7 ATX/AT Mode Selection (PSON1) Table 1.8: ATX/AT Mode Selection (PSON1) Function Jumper Setting 1 2 3 AT Mode 1-2 closed 2 3 ATX Mode (Default) General Information 1 2-3 closed 1.8.8 LVDS Panel Voltage Selection (JLVDS1) Table 1.9: LVDS Panel Voltage Selection (JLVDS1) Function Jumper Setting Set LVDS Panel as +5V Set LVDS Panel as +3.3V (Default) Set LVDS Panel as +12V 1.8.9 Watchdog timer output and OBS beep (JWDT1+JOBS1) Table 1.
1.8.10 Power switch/HDD LED/SMBus/Speaker pin header (JFP1) Table 1.11: Watchdog timer output and OBS beep (JWDT1+JOBS1) Function Setting JFP1(7-10) (Default) Pin Signal Pin Signal 1 +5V 2 HDD LED+ 3 Power Button+ 4 NC 5 HDD LED- 6 Power Button- 7 SPK_P3 8 SMB_DATA 9 System Reset+ 10 SPK_P4 11 SMB_CLK 12 System Reset- 1.9 System Memory AIMB-203 has two sockets for a 204-pin DDR3 SODIMM. This socket uses a 1.5 V unbuffered double data rate synchronous DRAM (DDR SDRAM).
1.12 Processor Installation The AIMB-203 is designed for LGA1150, Core i7/Core i5/Core i3, Pentium, Celeron processor.
AIMB-203 User Manual 14
Chapter 2 Connecting Peripherals 2
2.1 Introduction You can access most of the connectors from the top of the board as it is being installed in the chassis. If you have a number of cards installed or have a packed chassis, you may need to partially remove the card to make all the connections. 2.2 USB Ports (LAN1_USB12/LAN2_USB34/USB56/ USB78) AIMB-203 provides up to eight USB ports. Two USB3.0 and two USB2.0 on the rear side and four pin header on the board. The USB interface complies with USB Specification Rev. 2.0 and Rev. 3.
Chapter 2 2.3 DVI-D(Up) and VGA(Down) connector (VGA1+DVI1) Connecting Peripherals AIMB-203 includes VGA and DVI-D interfaces that can drive conventional VGA and DVI-D displays. VGA is a standard 15-pin D-SUB connector commonly used for VGA. Pin assignments for VGA and DVI-D connectors are detailed in Appendix A.
2.4 Serial Ports (COM1~COM9) COM1 COM2 ~ COM5 box header (COM2345) COM6 ~ COM9 box header (COM6789) AIMB-203 supports nine serial ports. COM1~4 and COM6~9 supports RS-232 function, COM5 supports RS-232/422/485 function by BIOS selection. COM1 and COM2 supports 5V/12V by jumper selection. These ports can connect to serial devices, such as a mouse or a printer, or to a communications network. The IRQ and address ranges for both ports are fixed.
2.6 CPU Fan Connector (CPU_FAN1) If a fan is used, this connector supports cooling fans of 500 mA (6 W) or less. 19 AIMB-203 User Manual Connecting Peripherals Two 6-pin mini-DIN connectors (KBMS1) on the motherboard provide connection to a PS/2 keyboard and a PS/2 mouse, respectively. Chapter 2 2.
2.7 System FAN Connector (SYSFAN1/2) If a fan is used, this connector supports cooling fans of 500 mA (6 W) or less.
There are several headers for monitoring and controlling the AIMB-203. Chapter 2 2.8 Power Switch/HDD LED/SMBUS/Speaker Pin Header (JFP1) & Power LED and Keyboard Lock Pin Header (JFP2) Power switch/HDD LED/SMBus/ Speaker pin header (JFP1) SP EA KE R SM _B US HD D_LE D RS T_BT N PWR_BT N Power LED and keyboard lock pin header (JFP2) 2.8.
2.8.5 Power LED and keyboard lock connector (JFP2/PWR_LED & KEY LOCK) (JFP2/PWR_LED & KEY LOCK) is a 5-pin connector for the power on LED and Key Lock function. Refer to Appendix B for detailed information on the pin assignments. The Power LED cable should be connected to pin 1-3. The key lock button cableshould be connected to pin 4-5. There are 3 modes for the power supply connection. The first is “ATX power mode”; the system turns on/off by a momentary power button.
SATA3 SATA2 SATA1 AIMB-203 features a high performance Serial ATA III & II interface (up to 600 MB/s & 300 MB/s) which eases hard drive cabling with thin, space-saving cables. 23 AIMB-203 User Manual Connecting Peripherals 2.11 SATA Signal Connector (SATA1 ~ SATA3) Chapter 2 2.
2.12 HD Analog Audio Interface (AUDIO1, FPAUD1) Front headphone connector (FPAUD1) is for a chassis-mounted front panel audio I/O module that supports either HD Audio or legacy AC’97 (optional) audio standard. Connect this connector with the front panel audio I/O module cable.
Chapter 2 2.13 PCI-E x16 Slot (PCIEX16_1) Connecting Peripherals AIMB-203 provides 1 x PCI express x16 slot. 2.
2.15 LVDS Backlight Inverter Power Connector (INV1) Note! Signal Description Signal VR Signal Description Vadj=0.75 V (Recommended: 4.
MINIPCIE connector (MINIPCIE2) 27 AIMB-203 User Manual Connecting Peripherals 2.17 MINIPCIE Connector (MINIPCIE2) & SIM Card Socket (SIM1) Chapter 2 2.
SIM Card holder (SIM2) 2.
. 0 2.21 SPI BIOS Flash Socket (SPI1) The SPI flash card pin header may be used to flash BIOS if the AIMB-203 cannot power on. 29 AIMB-203 User Manual Connecting Peripherals 2.20 General Purpose I/O Pin Header (GPIO1) Chapter 2 2.
. 2.
Signal CASEOP GND 2.24 ATX 12V Power Supply Connector (ATX12V1) & ATX Power Supply Connector (ATXPWR1) ATX 12V power supply connector (ATX12V1) ATX Power supply connector (ATXPWR1) 31 AIMB-203 User Manual Connecting Peripherals Pin 1 2 Chapter 2 2.
2.25 CMOS battery Wafer Box (BAT1) Pin 1 2 2.
Chapter 2 2.
AIMB-203 User Manual 34
Chapter 3 BIOS Operation 3
3.1 Introduction With the AMI BIOS Setup program, you can modify BIOS settings and control the special features of your computer. The Setup program uses a number of menus for making changes and turning special features on or off. This chapter describes the basic navigation of the AIMB-203 setup screens. 3.2 BIOS Setup The AIMB-203 Series system has AMI BIOS built in, with a CMOS SETUP utility that allows users to configure required settings or to activate certain system features.
Press to enter AMI BIOS CMOS Setup Utility, the Main Menu will appear on the screen. Use arrow keys to select among the items and press to accept or enter the sub-menu. Chapter 3 3.2.1 Main Menu BIOS Operation The Main BIOS setup screen has two main frames. The left frame displays all the options that can be configured. Grayed-out options cannot be configured; options in blue can. The right frame displays the key legend. Above the key legend is an area reserved for a text message.
3.2.2 Advanced BIOS Features Select the Advanced tab from the AIMB-203 setup screen to enter the Advanced BIOS Setup screen. You can select any of the items in the left frame of the screen, such as CPU Configuration, to go to the sub menu for that item. You can display an Advanced BIOS Setup option by highlighting it using the keys. All Advanced BIOS Setup options are described in this section. The Advanced BIOS Setup screen is shown below. The sub menus are described on the following pages.
Chapter 3 3.2.2.1 PCI Subsystem Settings BIOS Operation PCI Common Settings PCI Latency Timer Value to be programed into PCI Latency Timer Register. VGA Palette Snoop Enable or Disable VGA palette registers snooping. PERR# Generation Enable or Disable PERR# Generation. SERR#Generation Enable or Disable SERR# Generation.
PCI Express Device Register Settings Relaxed Ordering Enable or disable Relaxed Ordering. Extended Tag Enable or disable Extended Tag. No Snoop Enable or disable No Snoop. Maximum Payload Set Maximum Payload of PCI Express Device or allow System BIOS to select the value. Maximum Read Request Set Maximum Read Request Size of PCI Express Device or allow System BIOS to select the value.
Restore PCIE Registers On non-PCI Express aware OS's (Pre Windows Vista) some devices may not be correctly re initialized after S3. Enabling this register PCI Express device configurations on S3 resume. Warning: Enabling this may cause issues with other hardware after S3 resume. 3.2.2.
3.2.2.3 Trusted Computing Security Device Support Enable or disable BIOS support for security device. 3.2.2.
Chapter 3 3.2.2.5 CPU Configuration BIOS Operation 3.2.2.6 SATA Configuration SATA Controller(s) This item allows users to enable or disable the SATA device.
SATA Mode Selection This item allows users to select mode of SATA controller(s). 3.2.2.7 INTEL Rapid Start Technology Intel® Rapid start technology This item allows users to enable or disable Intel rapid start technology.
Chapter 3 3.2.2.8 PCH(FW) Configuration BIOS Operation PCH-FW Version PCH-FW page shows Intel ME FW information. MDES BIOS Status Code Enable or disable MDES BIOS Status Code. Me FW Image Re-Flash This item allows users to enable or disable Me FW image re-flash function.
3.2.2.9 Intel® Anti-Theft Technology Configuration Intel® Anti-theft Technology This item allows users to enable or disable Intel AT in BIOS for testing only. Enter Intel® AT Suspend Mode This item allows users to enable or disable enter Intel AT suspend mode function.
Chapter 3 3.2.2.10 USB configuration BIOS Operation Legacy USB support Enables support for legacy USB. Auto option disables legacy support if no USB devices are connected. USB3.0 support This item allows users to enable or disable USB3.0 function. XHCI Hand-off This is a workaround for OS without XHCI hand-off support. The XHCI ownership change should claim by XHCI driver. EHCI Hand-off This is a workaround for OS without EHCI hand-off support.
3.2.2.
Chapter 3 BIOS Operation AIMB-203 User Manual 49
Serial Port 6/7/8/9 This item will allow users to enable or disable serial port 6/7/8/9. Change Settings This item allows users to change the serial port 6/7/8/9 setting.
Chapter 3 BIOS Operation AIMB-203 User Manual 51
AIMB-203 User Manual 52
Chapter 3 BIOS Operation Serial Port 1/2/3/4/5 This item will allow users to enable or disable serial port 1/2/3/4/5. Change Settings This item allows users to change the serial port 1/2/3/4/5 setting.
Parallel Port This item will allow users to enable or disable parallel port. Change Settings This item allows users to change the parallel port setting. Device Mode This item allows users to change the device mode. Digital I/O GPI 0/1/2/3/4/5/6/7 This item will allow users to set up Digital I/O 0~7 to "input" or "output".
Chapter 3 3.2.2.12 Smart Fan Mode Configuration BIOS Operation CPU Fan Mode To enable or disable CPU smart fan. System Fan Mode To enable or disable System Smart Fan.
3.2.2.13 PC Health Status This Page Shows AIMB-203 PC Health Status. CPU Warning Temperature Use this to set the CPU warning temperature threshold. When the system CPU reaches the warning temperature, the buzzer will beep. ACPI Shutdown Temperature This screen allows users to set the CPU temperature at which the system will automatically shut down to prevent the CPU from overheating damage.
Chapter 3 3.2.2.14 Serial Port Console Redirection BIOS Operation Console Redirection This item allows users to enable or disable console redirection.
3.2.3 Chipset This page provides information of the chipset on AIMB-203. PCH-IO Configuration PCI Express Configuration Details of PCI Express items.
Chapter 3 USB Configuration Details of USB items. PCH Azalia Configuration Details of PCH azalia items. LAN 1controller Enable or disable the LAN 1 controller. LAN 1 PXE OpROM Enable or disable the LAN 1 option-ROM. LAN 2 controller Enable or disable the LAN 2 controller. LAN 2 PXE OpROM Enable or disable the LAN 2 option-ROM. PCIE Wake Enable or disable PCIE to wake the system from S5. Restore AC Power Loss This item allows users to select off, on and last state. BIOS Operation 3.2.3.
PCIE Root Port Function Swapping This item allows users to enable or disable PCIE Root Port Function Swapping. Subtractive Decode This item allows users to enable or disable Subtractive Decode. PCI Express Root Port 1 & 3 Control the PCI Express Root Port ASPM Support This item allows users to enable or disable PEG ASPM. L1 Substates This item allows users to select L1.1 or L1.2. URR This item allows users to enable or disable the URR function.
3.2.3.2 USB Configuration USB Precondition This item allows user to enable or disable USB Precondition. XHCI Mode Select Smart auto, Auto, Enabled and Disable Mode of operation of XHCI controller. Note! Smart auto setting remembers the last setting, but auto mode does not. Using smart auto setting, USB devices may not be recognized when system rebooting with more than one USB device connected. BTCG Enables or disables the BTCG function.
3.2.3.3 PCH Azalia Configuration Azalia Control detection of the Azalia device.
Chapter 3 3.2.3.4 System Agent (SA) Configuration BIOS Operation Graphic Configuration Graphics Turbo IMON Current Graphics turbo IMON current values supported (14-31). Primary Display "Auto or IGFX or PEG” optimal to Primary Display.
Internal Graphics "Auto or Disable or Enable" Internal Graphics. Aperture Size Aperture size optimal between 128MB, 256MB, or 512MB. DVMT Pre-Allocated DVMT pre-allocated (fixed) Graphics memory size optimal from 32M to 1024M. DVMT Total Gfx Mem DVMT Total Gfx Mem optimal Between 128M, 256M or MAX. Gfx Low Power Mode This item allows users to enable or disable IGD low power mode.
BIOS SETUP MENU Single Display DOS Win7 PASS PASS PASS DVI PASS PASS PASS DP PASS PASS PASS LVDS PASS PASS PASS Dual Display BIOS SETUP MENU DOS Win7 (Extended mode & Clone mode) CRT DP PASS Only Primary PASS CRT DVI PASS Only Primary PASS CRT LVDS PASS Only Primary PASS DVI LVDS PASS Only Primary PASS DVI DP PASS Only Primary PASS DP LVDS PASS Only Primary PASS 3.2.3.
DMI Extended Synch Control This item allows users to enable or disable DMI Extended Synch. DMI Gen 2 This item allows users to select DMI speed. DMI De-emphasis Control Configure the De-emphasis control on DMI. DMI IOT This item allows users to enable or disable DMI IOT. 3.2.3.6 NB PCIe Configuration PEG0 - Gen x "Auto, Enable or Disable" PEG0 - Gen x Run-time C7 Allowed Enable or Disable the entry to C7 state.
3.2.3.7 Memory Information DIMM profile Select DIMM timing profile that should be used. Memory Frequency Limiter Maximum Memory Frequency selection in MHz. Max TOLUD This item allows users to select the maximum TOLUD. Enh Interleave Support This item allows users to enable or disable EnH Interleave function. RI Support This item allows users to enable or disable RI support function.
DLL Weak Lock Support This item allows users to enable or disable DLL Weak Lock Support function. Mc Lock This item allows users to enable or disable Mc Lock function. Ch Hash Support This item allows users to enable or disable Ch Hash function. Ch Hash Mask Set the BIT(s) to be included in the XOR function. NOTE: BIT mask corresponds to BITS[19:6] 3.2.4 Boot Setup Prompt Timeout This item allows you to change number of seconds to wait for setup activation key.
Chapter 3 3.2.5 Security BIOS Operation Select Security Setup from the AIMB-203 Setup main BIOS setup menu. All Security Setup options, such as password protection and virus protection are described in this section. To access the sub menu for the following items, select the item and press: Change Administrator / User Password.
3.2.6 Save & Exit Save Changes and Exit This item allows you to exit system setup after saving changes. Discard Changes and Exit This item allows you to exit system setup without saving any changes. Save Changes and Reset This item allows you to reset the system after saving the changes. Discard Changes and Reset This item allows you to reset system setup without saving any changes. Save Changes This item allows you to save changes done so far to any of the options.
Chapter 4 4 Software Introduction & Service
4.1 Introduction The mission of Advantech Embedded Software Services is to "Enhance quality of life with Advantech platforms and Microsoft® Windows® embedded technology." We enable Windows® Embedded software products on Advantech platforms to more effectively support the embedded computing community. Customers are freed from the hassle of dealing with multiple vendors (hardware suppliers, system integrators, embedded OS distributors) for projects.
Watchdog A watchdog timer (WDT) is a device that performs a specific operation after a certain period of time if something goes wrong and the system does not recover on its own. A watchdog timer can be programmed to perform a warm boot (restarting the system) after a certain number of seconds. The Hardware Monitor (HWM) API is a system health supervision API that inspects certain condition indexes, such as fan speed, temperature and voltage. 4.2.1.
AIMB-203 User Manual 74
Chapter 5 Chipset Software Installation Utility 5
5.1 Before You Begin To facilitate the installation of the enhanced display drivers and utility software, read the instructions in this chapter carefully. The drivers for the AIMB-203 are located on the software installation CD. The driver in the folder of the driver CD will guide and link you to the utilities and drivers under a Windows system. Updates are provided via Service Packs from Microsoft*. Note! The files on the software installation CD are compressed.
1. Insert the driver CD into your system's CD-ROM drive. You can see the driver folder items. Navigate to the "Intel Chip" folder and click "infinst_autol.exe" to complete the installation of the driver. Chapter 5 5.
AIMB-203 User Manual 78
Chapter 6 VGA Setup 6
6.1 Introduction 4th Gen Intel Core i processors are embedded with an integrated graphics controller. You need to install the VGA driver to enable the function. Optimized integrated graphic solution: With Intel Graphics Flexible, it supports versatile display options and 32-bit 3D graphics engine. Dual independent display, enhanced display modes for widescreen flat panels for extend, twin, and clone dual display mode, and optimized 3D support deliver an intensive and realistic visual experience. 6.
Chapter 7 7 LAN Configuration
7.1 Introduction The AIMB-203 has dual Gigabit Ethernet LANs via dedicated PCI Express x1 lanes (Realtek 8111E (LAN1) and Realtek 8111E(LAN2)) that offer bandwidth of up to 500 MB/sec, eliminating the bottleneck of network data flow and incorporating Gigabit Ethernet at 1000 Mbps. 7.2 Features Integrated 10/100/1000 Mbps transceiver 10/100/1000 Mbps triple-speed MAC High-speed RISC core with 24-KB cache On-chip voltage regulation Wake-on-LAN (WOL) support PCI Express X1 host interface 7.
Insert the driver CD into your system's CD-ROM drive. Select the "Realtek GBE Controller" folder then navigate to the directory for your OS. Chapter 7 7.
AIMB-203 User Manual 84
Appendix A A I/O Pin Assignments
A.1 PS/2 Keyboard and PS/2 Mouse Connector (KBMS1) Pin Signal 1 Keyboard DATA 2 NC 3 GND 4 +5V 5 Keyboard CLK 6 NC 7 Mouse DATA 8 NC 9 GND 10 +5V 11 Mouse CLK 12 NC A.
Signal Pin Signal 1 RED 2 GREEN 3 BLUE 4 ID2 5 GND 6 RED GND 7 GREEN GND 8 BLUE GND 9 KEY 10 SGND 11 ID0 12 SDA 13 HSYNC 14 VSYNC 15 SCL 16 TMDS DATA2- 17 TMDS DATA2+ 18 TMDS DATA 2/4 Shield 19 GND 20 GND 21 DDC clock 22 DDC data 23 GND 24 TMDS DATA1- 25 TMDS DATA1+ 26 TMDS DATA 1/3 Shield 27 GND 28 GND 29 +5V 30 GND 31 Hot Plug Detect 32 TMDS DATA0- 33 TMDS DATA0+ 34 GND 35 GND 36 GND C1 GND C2 GND C3 GND C4 GND C5 GND A.
A.4 COM1 Connector (COM1) Pin Signal Pin Signal 1 DCD# 6 DSR# 2 RXD 7 RST# 3 TXD 8 CTS# 4 DTR# 9 RI 5 GND A.5 RJ45+USB3.
Pin Signal Pin Signal R2 MDI_0+ R3 MDI_0- R4 MDI_1+ R5 MDI_1- R6 MDI_2+ R7 MDI_2- R8 MDI_3+ R9 MDI_3- U1 +5V U2 D0- U3 D0+ U4 GND U5 RX0- U6 RX0+ U7 GND U8 TX0- U9 TX0+ U10 +5V U11 D1- U12 D1+ U13 GND U14 RX1- U15 RX1+ U16 GND U17 TX1- U18 TX1+ A.7 HD Analog Audio Interface (AUDIO1) Pin Signal 1 MIC IN 2 LINE OUT 3 LINE IN 89 AIMB-203 User Manual Appendix A I/O Pin Assignments A.6 RJ45+USB2.
A.8 Case Open Selection Pin Header (JCASEOP_SW1) Pin Signal 1 CASEOP# 2 HWM_CASEOP# 3 CASEOP Note: Setting Case Open w/ Normal Close or Open Switch. (2-3) is default. A.9 Case Open Pin Header (JCASE1) Pin Signal 1 CASEOP 2 GND A.
Pin Signal 1 MIC IN-L 2 GND 3 MIC IN-R 4 FPAUD_DETECT# 5 LINE OUT-R 6 SENSE R1 7 SENSE 8 KEY 9 LINE OUT-L 10 SENSE R2 A.12 HD Audio Interface Pin Header (SPDIF1) Pin Signal 1 +5V 2 KEY 3 SPDIF OUT 4 GND 91 AIMB-203 User Manual Appendix A I/O Pin Assignments A.
A.13 Print Port Interface Box Header (LPT1) Pin Signal Pin Signal 1 STB# 2 AFD# 3 PD0 4 ERR# 5 PD1 6 INIT# 7 PD2 8 SLIN# 9 PD3 10 GND 11 PD4 12 GND 13 PD5 14 GND 15 PD6 16 GND 17 PD7 18 GND 19 ACK# 20 GND 21 BUSY 22 GND 23 PE 24 GND 25 SLCT 26 NC A.14 LVDS VESA, JEIDA Format Selection Pin Header (JLVDS_VCON1) Pin Signal 1 +3.
Pin Signal 1 GND 2 AMP_OUT-L 3 GND 4 AMP_OUT-R A.16 COM2 RI# Selection Pin Header (JSETCOM2_V1) Pin Signal 1 RI# 2 RI#_VCON 3 RI#_VCON 4 +5V 5 +12V 6 RI#_VCON 93 AIMB-203 User Manual Appendix A I/O Pin Assignments A.
A.17 LVDS Backlight Inverter Power Connector (INV1) Pin Signal 1 +12V 2 GND 3 BKL_EN 4 BKL_CTRL 5 +5V A.18 LVDS Panel Voltage Selection (JLVDS1) Pin Signal 1 NC 2 +5V 3 +12V 4 LVDS_VDD 5 NC 6 +3.
Appendix A I/O Pin Assignments A.
A.20 ATX 12V Power Supply Connector (ATX12V1) Pin Signal 1 GND 2 GND 3 +12V 4 +12V A.21 Low Pin Count Interface Header (LPC1) Pin Signal Pin Signal 1 LPC CLK (33MHz) 2 AD1 3 RESET# 4 AD0 5 FRAME# 6 +3.
Pin Signal Pin Signal 1 GPIO0 2 GPIO4 3 GPIO1 4 GPIO5 5 GPIO2 6 GPIO6 7 GPIO3 8 GPIO7 9 +5V 10 GND A.
A.24 COM5 RS232,RS422,RS485 Selection Pin Header (JSETCOM5) Pin Signal Pin Signal 1 RX 2 RX_485 3 RX 4 RX_422 5 RX 6 RX_232 7 DCD [5] 8 SOUT [5] 9 DCD# [5] 10 COM_SOUT [5] 11 TX_485- 12 RX_485+ 13 SIN [5] 14 DTR [5] 15 COM_SIN [5] 16 DTR# [5] 17 TX_485+ 18 RX_485- A.25 MINIPCIE, mSATA Connector (MINIPCIE1) MINIPCIE: Pin Signal Pin Signal 1 WAKE# 2 +3.3Vaux 3 Reserved 4 GND 5 Reserved 6 +1.
GND 16 Reserved 17 Reserved 18 GND 19 Reserved 20 DISABLE# 21 DETECT# 22 RESET# 23 PCIE_RX+ 24 +3.3Vaux 25 PCIE_RX- 26 GND 27 GND 28 +1.5V 29 GND 30 SMB_CLK 31 PCIE_TX- 32 SMB_DATA 33 PCIE_TX+ 34 GND 35 GND 36 USB_D- 37 GND 38 USB_D+ 39 +3.3Vaux 40 GND 41 +3.3Vaux 42 Reserved 43 V1.2_DETECT# 44 LED_WLAN# 45 Reserved 46 Reserved 47 Reserved 48 +1.5V 49 Reserved 50 GND 51 MSATA_DETECT# 52 +3.
33 TX+ 34 GND 35 GND 36 Reserved 37 GND 38 Reserved 39 +3.3V 40 GND 41 +3.3V 42 Reserved 43 Reserved 44 Reserved 45 Reserved 46 Reserved 47 Reserved 48 +1.5V 49 Reserved 50 GND 51 MSATA_DETECT# 52 +3.3V A.26 MINIPCIE Connector (MINIPCIE2) Pin Signal Pin Signal 1 WAKE# 2 +3.3Vaux 3 Reserved 4 GND 5 Reserved 6 +1.
GND 30 SMB_CLK 31 PCIE_TX- 32 SMB_DATA 33 PCIE_TX+ 34 GND 35 GND 36 USB_D- 37 GND 38 USB_D+ 39 +3.3Vaux 40 GND 41 +3.3Vaux 42 Reserved 43 V1.2_DETECT# 44 LED_WLAN# 45 Reserved 46 Reserved 47 Reserved 48 +1.5V 49 Reserved 50 GND 51 Reserved 52 +3.3Vaux A.27 Serial ATA Interface Connector (SATA1~SATA3) Pin Signal 1 GND 2 TX+ 3 TX- 4 GND 5 RX- 6 RX+ 7 GND A.
B7 GND A7 Reserved B8 +3.3V A8 Reserved B9 Reserved A9 +3.3V B10 +3.3VAUX A10 +3.
TX9- A55 GND B56 GND A56 RX9+ B57 GND A57 RX9- B58 TX10+ A58 GND B59 TX10- A59 GND B60 GND A60 RX10+ B61 GND A61 RX10- B62 TX11+ A62 GND B63 TX11- A63 GND B64 GND A64 RX11+ B65 GND A65 RX11- B66 TX12+ A66 GND B67 TX12- A67 GND B68 GND A68 RX12+ B69 GND A69 RX12- B70 TX13+ A70 GND B71 TX13- A71 GND B72 GND A72 RX13+ B73 GND A73 RX13- B74 TX14+ A74 GND B75 TX14- A75 GND B76 GND A76 RX14+ B77 GND A77 RX14- B78 TX15+ A7
A.
Pin Signal Pin Signal 1 +5V 2 +5V 3 D0- 4 D1- 5 D0+ 6 D1+ 7 GND 8 GND 9 KEY 10 NC A.33 Dual Port USB2.0 Pin Header (USB56) Pin Signal Pin Signal 1 +5V 2 +5V 3 D0- 4 D1- 5 D0+ 6 D1+ 7 GND 8 GND 9 KEY 10 NC A.34 Watchdog Timer Output and OBS Beep (JWDT1+JOBS1) Pin Signal 1 NC 2 WDT 3 RESET# 4 SIO BEEP 5 FRP BEEP 105 AIMB-203 User Manual Appendix A I/O Pin Assignments A.32 Dual Port USB2.
A.35 AT/ATX Mode Selection (PSON1) Pin Signal 1 VCCAT 2 +3.3V 3 VCCATX A.36 ATX Power Supply Connector (ATXPWR1) Pin Signal Pin Signal 1 +3.3V 11 +3.3V 2 +3.
Pin Signal 1 BAT VCC 2 GND Appendix A I/O Pin Assignments A.37 CMOS Battery Wafer Box (BAT1) A.38 CMOS Mode Selection (JCMOS1) Pin Signal 1 NC 2 RTC RESET# 2 GND A.
A.40 Power Switch/HDD LED/SMBus/Speaker Pin Header (JFP1) Pin Signal Pin Signal 1 +5V 2 HDD LED+ 3 Power Button+ 4 NC 5 HDD LED- 6 Power Button- 7 SPK_P3 8 SMB_DATA 9 System Reset+ 10 SPK_P4 11 SMB_CLK 12 System Reset- A.41 CPU FAN Connector (CPUFAN1) Pin Signal 1 GND 2 +12V 3 DETECT 4 PWM IN A.
Pin Signal 1 GND 2 FAN POWER 3 DETECT Appendix A I/O Pin Assignments A.43 System Fan2 Connector (SYSFAN2) A.
www.advantech.com Please verify specifications before quoting. This guide is intended for reference purposes only. All product specifications are subject to change without notice. No part of this publication may be reproduced in any form or by any means, electronic, photocopying, recording or otherwise, without prior written permission of the publisher. All brand and product names are trademarks or registered trademarks of their respective companies. © Advantech Co., Ltd.
