User Manual AIMB-213 Intel® Atom™ N455/D525 1.66/1.
Copyright The documentation and the software included with this product are copyrighted 2011 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable.
A Message to the Customer Advantech Customer Services Each and every Advantech product is built to the most exacting specifications to ensure reliable performance in the harsh and demanding conditions typical of industrial environments. Whether your new Advantech equipment is destined for the laboratory or the factory floor, you can be assured that your product will provide the reliability and ease of operation for which the name Advantech has come to be known. Your satisfaction is our primary concern.
Declaration of Conformity FCC Class B This device complies with the requirements in part 15 of the FCC rules: Operation is subject to the following two conditions: This device may not cause harmful interference This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Memory Compatibility AIMB-213N Memory Compatibility list Size Speed Vendor PN Advantech PN Memor y 1GB DDR3 1066 TS128MSK64V1U/ TS2KSU28200-1S 96SD3-1G1066NN-TR PASS 1GB DDR3 1066 TS128MSK64V1U 96SD3-1G1066NN-TR PASS 2GB DDR3 1066 TS256MSK64V1U/ TS5KSU28400-1S 96SD3-2G1066NN-TR PASS 2GB DDR3 1066 TS128MSK64V1U 96SD3-2G1066NN-TR PASS 1GB DDR3 1066 78.02GC3.420 96SD3-1G1066NN-AP PASS 2GB DDR3 1066 78.A2GC3.
AIMB-213D Memory Compatibility list Brand Transcend Size Speed Vendor PN Advantech PN Memory 1GB DDR3 1066 TS128MSK64V1U/ TS2KSU28200-1S 96SD3-1G1066NN-TR PASS 1GB DDR3 1066 TS128MSK64V1U 96SD3-1G1066NN-TR PASS 2GB DDR3 1066 TS256MSK64V1U/ TS5KSU28400-1S 96SD3-2G1066NN-TR PASS 2GB DDR3 1066 TS128MSK64V1U 96SD3-2G1066NN-TR PASS 1GB DDR3 1066 78.02GC3.420 96SD3-1G1066NN-AP PASS 2GB DDR3 1066 78.A2GC3.
Product Warranty (2 years) Advantech warrants to you, the original purchaser, that each of its products will be free from defects in materials and workmanship for two years from the date of purchase. This warranty does not apply to any products which have been repaired or altered by persons other than repair personnel authorized by Advantech, or which have been subject to misuse, abuse, accident or improper installation.
Initial Inspection Before you begin installing your motherboard, please make sure that the following materials have been shipped: 1 x AIMB-213 Intel® Atom™ N455/D525 Mini-ITX motherboard 3 x SATA HDD cable 3 x SATA Power cable 1 x Serial port cable(1 to 4) 1 x I/O port bracket 1 x Startup manual 1 x Driver CD 1 x Warranty card 1 x CPU cooler (for Atom D525 only) If any of these items are missing or damaged, contact your distributor or sales representative immediately.
Contents Chapter 1 General Information ............................1 1.1 1.2 1.3 1.9 1.10 Introduction ............................................................................................... 2 Features .................................................................................................... 2 Specifications ............................................................................................ 3 1.3.1 System .......................................................................
2.9 2.10 2.11 2.12 2.13 2.14 2.15 2.16 2.17 Table 2.2: ATX power supply LED status (No support for AT power)................................................................. 20 Line In, Line Out, Mic In Connector (AUDIO1)........................................ 20 Serial ATA Interface (SATA1/2/3) ........................................................... 21 PCI .......................................................................................................... 21 Front Headphone Connector (HD1).....
A.1.3 Example Program ....................................................................... 67 Appendix B I/O Pin Assignments..........................71 B.1 USB Header (USB56, USB78)................................................................ 72 Table B.1: USB Header (USB56)............................................... 72 VGA Connector (VGA1) .......................................................................... 72 Table B.2: VGA Connector (VGA1) ...........................................
AIMB-213 User Manual xii
Chapter 1 1 General Information
1.1 Introduction The AIMB-213 is designed with the Intel® Atom™ N455/D525 and the ICH8M for industrial applications that require both performance computing and enhanced power management capabilities. The motherboard has on board CPU Intel® Atom™ N455/ D525 1.66/1.8 GHz and DDR3 800 MHz up to 2/4 GB.
1.3.1 System 1.3.2 Memory RAM: Up to 2 GB/ 4GB in 2 slots 204-pin SODIMM sockets. Supports single channel DDR3 800 SDRAM 1.3.3 Input/Output PCI bus: 1 PCI slot Serial ports: Six serial ports, COM2 is RS-232/422/485 and five of RS-232 serial ports Keyboard and PS/2 mouse connector: Supports one standard PS/2 keyboard, one standard PS/2 mouse (On board 6pin wafer box) USB port: Supports up to eight USB 2.
1.3.7 Mechanical and environmental specifications Operating temperature: 0 ~ 60° C (32 ~ 140° F, Depending on CPU) Storage temperature: -40 ~ 85° C (-40 ~ 185° F) Humidity: 5 ~ 95% non-condensing Power supply voltage: +12 V Power consumption: AIMB-213N sku +12 V @ 3.09 A AIMB-213D sku +12 V @ 3.43 A Measure of the maximum current values with system under maximum load Board size: 170 mm x 170 mm (6.69" x 6.69") Board weight: 0.365 kg 1.
Chapter 1 Table 1.
1.5 Board layout: Jumper and Connector Locations 36 25 14 1 2 Figure 1.1 Jumper and Connector Location Figure 1.
CRT VGA Channel A Intel N455/D525 LVDS/DVI DDR3 800 24-bit LVDS 1 ATA 100 Port or CF Type II DMA 33/66/100 PCIe x1 GbE LAN1: Intel 82567V 3 SATA ports 300 MB/s PCIe x1 GbE LAN2: Intel 82583V 8 USB Ports USB 2.0/1.1 32-bit/33MHz PCI Bus PCI Realtek Audio Codec ALC892 HD Audio PCIe x1 Mini-PCIe ICH8M LPC SPI BIOS 8-bit GPIO Super I/O Winbond W83627DHG-P Fintek F821216AD 1 RS-232, 1 RS-232/422/485 4 RS-232 Infineon TPM 1.2 (optional) Figure 1.
1.7 Safety Precautions Warning! Always completely disconnect the power cord from chassis whenever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges. Only experienced electronics personnel should open the PC chassis. Caution! Always ground yourself to remove any static charge before touching the motherboard. Modern electronic devices are very sensitive to electrostatic discharges.
This section provides instructions on how to configure your motherboard by setting the jumpers. It also includes the motherboards's default settings and your options for each jumper. 1.8.1 How to Set Jumpers 1.8.2 CMOS Clear (CMOS1) The AIMB-213 motherboard contains a jumper that can erase CMOS data and reset the system BIOS information. Normally this jumper should be set with pins 1-2 closed.
1.8.3 COM2 RS 232/422/485 Mode Selector (JSETCOM2) Users can use JSETCOM2 to select among RS 232/422/485 modes for COM2. The default setting is RS 232. RS232* RS422 RS485 Table 1.4: COM2 RS 232/422/485 Mode Selector (JSETCOM2) Function Jumper Setting *RS232 (5-6) + (7-9) + (8-10) + (13-15) + (14-16) closed RS422 (3-4) + (9-11) + (10-12) + (15-17) + (16-18) closed RS-485 (1-2) + (9-11) + (10-12) + (15-17) + (16-18) closed *: Default 1.8.4 JLVDS1 and JLVDS2: LCD Power 3.
Chapter 1 1.8.5 PSON1: ATX, AT Mode Selector Table 1.6: PSON1: ATX, AT Mode Selector Closed Pins Result 1-2 AT Mode 2-3* ATX Mode *Default 1 General Information 1 ATX Mode 2-3 closed AT Mode 1-2 closed 1.8.6 JWDT1: Watchdog Timer Output Option Table 1.
1.9 System Memory The AIMB-213 has one socket for a 204-pin SODIMMx2. This socket uses a 1.5 V unbuffered double-data-rate three synchronous DRAM (DDR3 SDRAM). DRAM is available in capacities of 512 MB, 1 GB and 2 GB. The socket can be filled in any combination with DIMMs of any size, giving a total memory size between 512 MB and 4 GB. AIMB-213 does NOT support ECC (error checking and correction). 1.
Chapter 2 Connecting Peripherals 2
2.1 Introduction You can access most of the connectors from the top of the board as it is being installed in the chassis. If you have a number of cards installed or have a packed chassis, you may need to partially remove the card to make all the connections. 2.2 USB Ports (LAN1_USB12/LAN2_USB34/USB56/ USB78) The AIMB-213 provides up to eight USB ports. The USB interface complies with USB Specification Rev. 2.0 supporting transmission rate up to 480 Mbps and is fuse protected.
Chapter 2 2.3 VGA Connector (VGA1) 10 15 1 6 11 The AIMB-213 includes VGA and DVI interface that can drive conventional VGA and DVI displays. VGA1 is a standard 15-pin D-SUB connector commonly used for VGA. DVI1 is DVI-I connector but only for DVI-D single link signals output. Pin assignments for VGA and DVI connector are detailed in Appendix B.
2.4 Serial Ports (COM1~COM6) COM12 AIMB-213 supports six serial ports. 1 of RS-232/422/485 - COM1, COM2, COM3, COM4, COM5 and COM6. The user can use JSETCOM2 to select among RS 232/ 422/485 modes for COM2. These ports can connect to serial devices, such as a mouse or a printer, or to a communications network. The IRQ and address ranges for both ports are fixed. However, if you want to disable the port or change these parameters later, you can do this in the system BIOS setup.
5 4 3 2 1 On board 6-pin wafer box connector, supports one standard PS/2 keyboard, one standard PS/2 mouse. 2.6 CPU Fan Connector (CPU_FAN1) 1 2 3 If a fan is used, this connector supports cooling fans of 500 mA (6 W) or less. 17 AIMB-213 User Manual Connecting Peripherals 6 Chapter 2 2.
2.7 System FAN Connector (SYSFAN1) 1 2 3 If a fan is used, this connector supports cooling fans of 500 mA (6 W) or less.
Chapter 2 2.8 Front Panel Connectors (JFP1/JFP1+JFP2) There are several external switches to monitor and control the AIMB-213. JFP1 3 2 1 1 6 5 4 2 9 8 7 3 12 11 10 4 5 2.8.1 ATX soft power switch ((JFP1+JFP2/ PWR_SW)) If your computer case is equipped with an ATX power supply, you should connect the power on/off button on your computer case to ((JFP1+JFP2/ PWR_SW)), for convenient power on and off. 2.8.2 Reset (JFP1+JFP2/ RESET) Many computer cases offer the convenience of a reset button.
2.8.5 Power LED and keyboard lock connector (JFP1 / PWR_LED & KEY LOCK) (JFP1 / PWR_LED & KEY LOCK) is a 5-pin connector for the power on LED and Key Lock function. Refer to Appendix B for detailed information on the pin assignments. The Power LED cable should be connected to pin 1-3. The key lock button cable should be connected to pin 4-5. There are 3 modes for the power supply connection. The first is “ATX power mode”; the system turns on/off by a momentary power button.
Chapter 2 2.10 Serial ATA Interface (SATA1/2/3) 2.11 PCI The AIMB-213 provides 1 x PCI slot. 21 AIMB-213 User Manual Connecting Peripherals AIMB-213 features a high performance Serial ATA interface (up to 300 MB/s) which eases cabling to hard drives with long, thin cables.
2.12 Front Headphone Connector (HD1) This connector is for a chassis-mounted front panel audio I/O module that supports either HD Audio or legacy AC’97 (optional) audio standard. Connect this connector with the front panel audio I/O module cable. Note! For motherboards with the optional HD Audio feature, we recommend that you connect a high-definition front panel audio module to this connector to take advantage of the motherboard’s high definition audio capability.
This connector is for an ATX Micro-Fit power supply. The plugs from the power supply are designed to fit these connectors in only one direction. Determine the proper orientation and push down firmly until the connectors mate completely. Chapter 2 2.13 ATX 12V Power Connector (ATX12V_1) Connecting Peripherals 2.14 SPI Flash connector(SPI_CN1) The SPI flash card pin header may be used to flash BIOS if the AIMB-213 cannot power on.
2.15 LCD Inverter Connector (INV1) Note! Signal Description Signal VR Signal Description Vadj=0.75 V (Recommended: 4.
Chapter 2 2.16 LVDS Connector (LVDS1) NC NC NC NC NC NC OD3OD3+ 2.
AIMB-213 User Manual 26
Chapter 3 BIOS Operation 3
3.1 Introduction AMI BIOS has been integrated into many motherboards, and has been very popular for over a decade. People sometimes refer to the AMI BIOS setup menu as BIOS, BIOS setup or CMOS setup. With the AMI BIOS Setup program, you can modify BIOS settings and control the special features of your computer. The Setup program uses a number of menus for making changes and turning special features on or off. This chapter describes the basic navigation of the AIMB-213 setup screens. 3.
Press to enter AMI BIOS CMOS Setup Utility, the Main Menu will appear on the screen. Use arrow keys to select among the items and press to accept or enter the sub-menu. Chapter 3 3.2.1 Main Menu BIOS Operation The Main BIOS setup screen has two main frames. The left frame displays all the options that can be configured. Grayed-out options cannot be configured; options in blue can. The right frame displays the key legend. Above the key legend is an area reserved for a text message.
3.2.2 Advanced BIOS Features Select the Advanced tab from the AIMB-213 setup screen to enter the Advanced BIOS Setup screen. You can select any of the items in the left frame of the screen, such as CPU Configuration, to go to the sub menu for that item. You can display an Advanced BIOS Setup option by highlighting it using the keys. All Advanced BIOS Setup options are described in this section. The Advanced BIOS Setup screen is shown below. The sub menus are described on the following pages.
Max CPUID Value Limit This item allows you to limit CPUID maximum value. Execute-Disable Bit Capability This item allows you to enable or disable the No-Execution page protection technology. Hyper Threading Technology This item allows you to enable or disable Intel Hyper Threading technology. Intel® SpeedStep(tm) tech When set to disabled, the CPU runs at its default speed, when set to enabled, the CPU speed is controlled by the operating system.
3.2.2.2 IDE Configuration ATA/IDE Configuration This can be configured as Disabled, Compatible or Enhanced. Configure SATA as This can be configured as IDE or AHCI. Primary, Secondary, and Third Master/Slave While entering setup, the BIOS automatically detects the presence of SATA/CF devices. This displays the status of SATA device auto-detection. Hard Disk Write Protect Disable/Enable device write protection. This will be effective only if device is accessed through BIOS.
Chapter 3 3.2.2.3 Super I/O Configuration This item enables users to set the Super IO device status, including enabling of COMs. BIOS Operation Onboard Serial port 1 [3F8 / IRQ4] This item allows user to adjust serial port 1 address and IRQ. Onboard Serial port 2 [2F8/ IRQ3] This item allows user to adjust serial port 2 address and IRQ. Onboard Serial port 3 [C80/IRQ10] This item allows user to adjust serial port 3 address and IRQ.
3.2.2.4 Hardware Health Configuration System Temperature This shows you the current temperature of system. CPU Temperature This shows the current CPU temperature. VCORE and Other Voltages This shows the voltage of VCORE, +3.3V, +3.3V, +12V, +5V, 5VSB(V), 3.
BIOS Operation Chapter 3 3.2.2.5 ACPI Setting General ACPI Configuration – Suspend mode Select the ACPI state used for system suspend. – Report Video on S3 Resume This item allows you to invoke VA BIOS POST on S3/STR resume.
Advanced ACPI Configuration – ACPI Version Features This item allows you to enable RSDP pointers to 64-bit fixed system description tables. – ACPI APIC support Include APIC table pointer to RSDT pointer list. – AMI OEMB table Include OEMB table pointer to R(x)SDT pointer lists. – Headless mode Enable / Disable Headless operation mode through ACPI.
Chipset ACPI Configuration Chapter 3 37 AIMB-213 User Manual BIOS Operation – Energy Lake Feature Allows you to configure Intel’s Energy Lake power management technology. – APIC ACPI SCI IRQ Enable/Disable APIC ACPI SCI IRQ. – USB Device Wakeup From S3 Enable/Disable USB Device Wakeup from S3/S4. – High Performance Event Timer Enable/Disable High performance Event timer.
3.2.2.6 APM Configuration Power Management/APM Enable or disable APM power management function. Restore on AC Power Loss This option allows user to set system action when AC power restores after AC power loss. Available options include Power Off, Power On, Last Status. Resume On Ring Disable/Enable RI wake event. Resume On RTC Alarm Disable/Enable RTC wake event.
Legacy USB Support Enables support for legacy USB. Auto option disables legacy support if no USB devices are connected. USB 2.0 Controller Mode This item allows you to select HiSpeed (480 Mbps) or FullSpeed (12 Mbps). BIOS EHCI Hand-Off This is a workaround for OSs without EHCI hand-off support. The EHCI ownership change should be claimed by EHCI driver. 39 AIMB-213 User Manual BIOS Operation Chapter 3 3.2.2.
3.2.3 Advanced PCI/PnP Settings Select the PCI/PnP tab from the AIMB-213 setup screen to enter the Plug and Play BIOS Setup screen. You can display a Plug and Play BIOS Setup option by highlighting it using the keys. All Plug and Play BIOS Setup options are described in this section. The Plug and Play BIOS Setup screen is shown below. 3.2.3.1 Clear NVRAM Set this value to force the BIOS to clear the Non-Volatile Random Access Memory (NVRAM).The Optimal and Fail-Safe default setting is No. 3.2.3.
3.2.3.5 Palette Snooping This item is designed to solve problems caused by some non-standard VGA card. 3.2.3.6 PCI IDE BusMaster When set to enabled, BIOS uses PCI busmastering for reading/writing to IDE drives. 3.2.3.8 IRQ3 / 4 / 5 / 7 / 9 / 10 /11 This item allows you respectively assign an interrupt types for IRQ-3, 4, 5, 7, 9, 10, 11. 3.2.3.9 DMA Channel0 / 1 / 3 / 5 / 6 / 7 When set to Available, will specify DMA is available to be used by PCI/PnP devices.
3.2.4 Boot Settings 3.2.4.1 Boot settings Configuration Quick Boot This item allows BIOS to skip certain tests while booting. This will decrease the time needed to boot the system. Quiet Boot If this option is set to Disabled, the BIOS displays normal POST messages. If Enabled, an OEM Logo is shown instead of POST messages. AddOn ROM Display Mode Set display mode for option ROM. Bootup Num-Lock Select the Power-on state for Numlock.
3.2.5 Security Setup Select Security Setup from the AIMB-213 Setup main BIOS setup menu. All Security Setup options, such as password protection and virus protection are described in this section. To access the sub menu for the following items, select the item and press : 3.2.5.1 Change Supervisor / User Password Provides for either installing or changing the password. 3.2.5.
3.2.6 Advanced Chipset Settings 3.2.6.1 North Bridge Chipset Configuration DRAM Frequency This item allows you to manually change DRAM frequency. Configure DRAM Timing by SPD This item allows you to enable or disable detect by DRAM SPD. Initiate Graphic Adapter This item allows you to select which graphics controller to use as the primary boot device. Internal Graphics Mode Select Select the amount of system memory used by the Internal graphics device.
Video Function Configuration Chapter 3 45 AIMB-213 User Manual BIOS Operation – DVMT Mode Select Displays the active system memory mode. – DVMT/FIXED Memory Specifies the amount of DVMT / FIXED system memory to allocate for video memory. – Boot Display Device Select boot display device at post stage. – Flat Panel Type This item allows you to select panel resolution. – DVI Panel Type This item allows you to select DVI panel resolution.
3.2.6.2 South Bridge Chipset Configuration – USB Functions Select: Disabled, 2 USB Ports, 4 USB Ports, 6 USB Ports or 8 USB Ports. – USB 2.0 Controller Enables or disables the USB 2.0 controller. – LAN1 Controller Enables or disables the GbE controller. – LAN1 Option-ROM Enables or disables GbE LAN boot. – Resume on LAN1 Enables or disables GbE LAN wake up from S5 function. – LAN2 Controller Enables or disables the GbE controller. – LAN2 Option-ROM Enables or disables GbE LAN boot.
Chapter 3 3.2.7 Exit Option BIOS Operation 3.2.7.1 Save Changes and Exit When you have completed system configuration, select this option to save your changes, exit BIOS setup and reboot the computer so the new system configuration parameters can take effect. 1. Select Save Changes and Exit from the Exit menu and press . The following message appears: Save Configuration Changes and Exit Now? [Ok] [Cancel] 2. Select Ok or Cancel. 3.2.7.
3.2.7.3 Discard Changes 1. Select Discard Changes from the Exit menu and press . 3.2.7.4 Load Optimal Defaults The AIMB-213 automatically configures all setup items to optimal settings when you select this option. Optimal Defaults are designed for maximum system performance, but may not work best for all computer applications. In particular, do not use the Optimal. Defaults if your computer is experiencing system configuration problems.
Chapter 4 4 Software Introduction & Service
4.1 Introduction The mission of Advantech Embedded Software Services is to "Enhance quality of life with Advantech platforms and Microsoft® Windows® embedded technology." We enable Windows® Embedded software products on Advantech platforms to more effectively support the embedded computing community. Customers are freed from the hassle of dealing with multiple vendors (hardware suppliers, system integrators, embedded OS distributors) for projects.
Brightness Control The Brightness Control API allows a developer to access embedded devices and easily control brightness. The Backlight API gives the developer on/off control of the backlight (screen) in embedded devices. 4.2.1.3 Monitor Watchdog A watchdog timer (WDT) is a device that performs a specific operation after a set period of time if something goes wrong and the system does not recover on its own.
4.2.2 Software Utility BIOS Flash The BIOS Flash utility allows the customer to update the flash ROM BIOS version, or to back up current BIOS by copying it from the flash chip to a file on the customer’s disk. The BIOS Flash utility also provides a command line version and an API for fast implementation into customized applications. Embedded Security ID Embedded applications represent valuable intellectual property, design knowledge, and innovation that belong to the System Integrator.
Chapter 5 Chipset Software Installation Utility 5
5.1 Before You Begin To facilitate the installation of the enhanced display drivers and utility software, read the instructions in this chapter carefully. The drivers for the AIMB-213 are located on the software installation CD. The driver in the folder of the driver CD will guide and link you to the utilities and drivers under a Windows system. Updates are provided via Service Packs from Microsoft*. Note! The files on the software installation CD are compressed.
1. Insert the driver CD into your system's CD-ROM drive. You can see the driver folder items. Navigate to the "Chipset" folder and click "infinst_autol.exe" to complete the installation of the driver. Chapter 5 5.
AIMB-213 User Manual 56
Chapter 6 VGA Setup 6
6.1 Introduction To benefit from the Intel® Atom N455/D525 integrated graphics controller, you need to install the graphic driver. 6.2 Windows 7/Vista/XP Note! Before installing this driver, make sure the CSI utility has been installed in your system. See Chapter 5 for information on installing the CSI utility. Insert the driver CD into your system's CD-ROM drive. You can see the driver folders items. Navigate to the "Graphic" folder and click "setup.
Chapter 7 7 LAN Configuration
7.1 Introduction The AIMB-213 has dual Gigabit Ethernet LANs via dedicated PCI Express x1 lanes (Intel 82567V (LAN1) and 82583V (LAN2)) that offer bandwidth of up to 500 MB/sec, eliminating the bottleneck of network data flow and incorporating Gigabit Ethernet at 1000 Mbps. 7.2 Features Integrated 10/100/1000 Mbps transceiver 10/100/1000 Mbps triple-speed MAC High-speed RISC core with 24-KB cache On-chip voltage regulation Wake-on-LAN (WOL) support PCI Express X1 host interface 7.
Insert the driver CD into your system's CD-ROM drive. Select the LAN folder then navigate to the directory for your OS. Chapter 7 7.
AIMB-213 User Manual 62
Appendix A A Programming the Watchdog Timer
A.1 Programming the Watchdog Timer The AIMB-213's watchdog timer can be used to monitor system software operation and take corrective action if the software fails to function within the programmed period. This section describes the operation of the watchdog timer and how to program it. A.1.1 Watchdog Timer Overview The watchdog timer is built into the super I/O controller W83627DHG-P.
Appendix A Programming the Watchdog Timer Unlock W83627DHG-P Select register of watchdog timer Enable the function of the watchdog timer Use the function of the watchdog timer Lock W83627DHG-P 65 AIMB-213 User Manual
Table A.1: Watchdog Timer Registers Address of Register (2E) Attribute Read/Write Value (2F) & description 87 (hex) ----- Write this address to I/O address port 2E (hex) twice to unlock the W83627DHG-P. 07 (hex) write Write 08 (hex) to select register of watchdog timer. 30 (hex) write Write 01 (hex) to enable the function of the watchdog timer. Disabled is set as default. F5 (hex) write Set seconds or minutes as units for the timer. Write 0 to bit 3: set second as counting unit.
1. Enable watchdog timer and set 10 sec.
;----------------------------------------------------------Mov al,07h ; Select registers of watchdog timer Out dx,al Inc dx Mov al,08h Out dx,al ;----------------------------------------------------------Dec dx ; Enable the function of watchdog timer Mov al,30h Out dx,al Inc dx Mov al,01h Out dx,al ;----------------------------------------------------------Dec dx ; Set minute as counting unit Mov al,0f5h Out dx,al Inc dx In al,dx Or al,08h Out dx,al ;---------------------------------------------------------
69 AIMB-213 User Manual Appendix A Programming the Watchdog Timer Dec dx ; Enable the function of watchdog timer Mov al,30h Out dx,al Inc dx Mov al,01h Out dx,al ;----------------------------------------------------------Dec dx ; Enable watchdog timer to be reset by mouse Mov al,0f7h Out dx,al Inc dx In al,dx Or al,80h Out dx,al ;----------------------------------------------------------Dec dx ; Lock W83627DHG-P Mov al,0aah Out dx,al 4.
;----------------------------------------------------------Dec dx ; Lock W83627DHG-P Mov al,0aah Out dx,al 5.
Appendix B B I/O Pin Assignments
B.1 USB Header (USB56, USB78) Table B.1: USB Header (USB56) Pin Signal Pin Signal 1 USB0_VCC5 2 USB1_VCC5 3 USB0_D- 4 USB1_D- 5 USB0_D+ 6 USB1_D+ 7 GND 8 GND 9 Key 10 GND B.2 VGA Connector (VGA1) 5 1 10 6 15 11 Table B.
Table B.
B.4 RS-232/422/485 Setting Interface (JSETCOM2) Table B.4: RS-232/422/485 Setting Interface (JSETCOM2) Pin Signal Pin Signal 1 R_SINA 2 RXD485_1 3 R_SINA 4 RXD422_1 5 R_SINA 6 RXD232_1 7 DCDA 8 SOUTA 9 COM1_DCD# 10 COM1_SOUT 11 COM1_TXD485N 12 COM1_RXD485P 13 SINA 14 DTRA 15 COM1_SIN 16 COM1_DTR# 17 COM1_TXD485P 18 COM1_RXD485N B.5 SPI_CN1: SPI Fresh Card Pin Connector 1 2 7 8 Table B.
6 5 4 3 2 1 Table B.6: PS/2 Keyboard and Mouse Connector (KBMS1) Pin Signal 1 KCLK_B 2 KDAT_B 3 MDAT_B 4 GND 5 KBMS1_VCC 6 MCLK_B B.7 CPU Fan Power Connector (CPU_FAN1) 1 2 3 Table B.7: CPU Fan Power Connector (CPU_FAN1) Pin Signal 1 GND 2 +12 V 3 DETECT B.8 System Fan Power Connector (CHA_FAN1) 1 2 3 Table B.8: System Fan Power Connector (SYSFAN1/SYSFAN2) Pin Signal 1 GND 2 +12 V 3 DETECT 75 AIMB-213 User Manual Appendix B I/O Pin Assignments B.
B.9 Power LED & Keyboard Lock Connector (JFP1) You can use an LED to indicate when the single board computer is on. Pin 1 of JFP3 supplies the LED's power, and Pin 3 is the ground. Table B.9: Power LED & Keyboard Lock Connector (JFP1) Pin Function 1 LED power 2 NC 3 GND 4 KEYLOCK# 5 GND B.10 Power switch/HDD LED/SMBus/Speaker (JFP1+JFP2) The single board computer has its own buzzer. You can also connect it to the external speaker on your computer chassis. Table B.
Table B.11: USB Port Pin Signal Pin Signal 1 VCC 3 Data0+ 2 Data0- 4 GND Table B.12: Ethernet 10/100 Mbps RJ-45 Port Pin Signal Pin Signal 1 XMT+ 5 N/C 2 XMT- 6 RCV- 3 RCV+ 7 N/C 4 N/C 8 N/C B.12 Line In, Line Out, Mic In Connector (AUDIO1) Line In Line Out Mic In B.13 Serial ATA0/1 (SATA1/2/3) Table B.
B.14 AT/ATX Mode (PSON1) Table B.14: AT/ATX Mode (PSON1) Pin Signal Pin Signal 1 VCCATX 2 VCCATX 3 GND 1 9 B.15 HD Audio Interface (HD1) Table B.15: AC-97 Audio Interface (HD1) Pin Signal Pin Signal 1 MIC2_L 2 GND 3 MIC2_R 4 FP_AUD_DET 5 LOUT2_R 6 SRTN1 7 LOUT2_DET 8 KEY 9 LOUT2_L 10 SRTN2 B.16 GPIO Pin Header (GPIO1) Table B.
NC NC NC NC NC NC NC NC OD3OD3+ Table B.
B.18 LVDS Power Jumper (JLVDS1 and JLVDS2) JLVDS1 for 3.3V LVDS panel JLVDS1 for 5V LVDS panel JLVDS2 JLVDS1 for 12V LVDS panel * default setting Table B.18: LVDS Power Jumper Pin Signal 1 VCC3 2 VCC_LCD 3 VCC B.19 LVDS Inverter (INV1) Table B.19: LVDS Power Jumper Pin Signal 1 +12V 2 GND 3 BL_EN 4 BL_CLT 5 +5V B.20 ATX 12 V connector (ATX12V_1) Table B.
Table B.21: DMA Channel Assignments Channel Function 0 Available 1 Available 2 Floppy disk (8-bit transfer) 3 Available 4 Cascade for DMA controller 1 5 Available 6 Available 7 Available B.22 Interrupt Assignments Table B.
www.advantech.com Please verify specifications before quoting. This guide is intended for reference purposes only. All product specifications are subject to change without notice. No part of this publication may be reproduced in any form or by any means, electronic, photocopying, recording or otherwise, without prior written permission of the publisher. All brand and product names are trademarks or registered trademarks of their respective companies. © Advantech Co., Ltd.
