User`s manual

User’s Manual
AIMB-240 Series User’s Manual
79
asked to confirm the password. Type the password again and press <Enter>. You may also
press <Esc> to abort the selection and not enter a password. To disable a password, just
press <Enter> when you are prompted to enter the password. A message will confirm the
password will be disabled. Once the password is disabled, the system will boot and you can
enter Setup freely. (some of BIOS has both supervisor and user password separately, the background diagram of BIOS setup
screen may not 100% matched with exactly BIOS setup screen. It only for demonstrate the Password functionality)