User manual

17 AIMB-252 User Manual
Chapter 1 Production Introduction
1.12.2 Memory Configurations
You can install 128 MB, 256 MB, 512 MB, 1GB and 2GB DDR2 SDRAM DIMMs into
the SODIMM sockets using the memory configurations in this section.
Note!  Installing DDR2 DIMM other than the recommended configurations
may cause memory sizing error or system boot failure. Use any of
the recommended configurations.
 Always install DIMMs with the same CAS latency. For optimum
compatibility, it is recommended that you obtain memory modules
from the same vendor.
 Due to chipset resource allocation, the system may detect less
than 1 GB system memory when you installed one 1 GB DDR2
memory modules.
 This motherboard does not support memory modules made up of
128 MB chips or double-sided x16 memory modules.
 Make sure that the memory frequency matches the CPU FSB
(Front Side Bus). Refer to the Memory frequency/CPU FSB
synchronization table.