User manual

AIMB-212 User Manual 20
2.8 Front Panel Connectors (JFP1/JFP1+JFP2)
There are several external switches to monitor and control the AIMB-212.
2.8.1 ATX soft power switch ((JFP1+JFP2/ PWR_SW))
If your computer case is equipped with an ATX power supply, you should connect the
power on/off button on your computer case to ((JFP1+JFP2/ PWR_SW)), for conve-
nient power on and off.
2.8.2 Reset (JFP1+JFP2/ RESET)
Many computer cases offer the convenience of a reset button. Connect the wire for
the reset button.
2.8.3 HDD LED (JFP1+JFP2/ HDDLED)
You can connect an LED to connector (JFP2/HDDLED) to indicate when the HDD is
active.
2.8.4 External speaker (JFP1+JFP2/ SPEAKER)
((JFP1+JFP2/ SPEAKER)) is a 4-pin connector for an external speaker. If there is no
external speaker, the AIMB-212 provides an onboard buzzer as an alternative. To
enable the buzzer, set pins 3-4 as closed.
+
36912
25811
14710
12345
JFP1 & JFP2
JFP1