User manual

AIMB-556 User Manual 58
Figure 3.12: PCI/PNP Setup (bottom)
3.4.1 Clear NVRAM
Set this value to force the BIOS to clear the Non-Volatile Random Access
Memory (NVRAM). The Optimal and Fail-Safe default setting is No.
3.4.2 Plug and Play O/S
Set this value to allow the system to modify the settings for Plug and Play
operating system support. The Optimal and Fail-Safe default setting is
No.
3.4.3 PCI Latency Timer
Use this to adjust the PCI Latency Timer. This option sets the latency of
all PCI devices on the PCI bus. The Optimal and Fail-Safe default setting
is 64.
3.4.4 Allocate IRQ to PCI VGA
Set this value to allow or stop the system from giving the VGA adapter
card an interrupt address. The Optimal and Fail-Safe default setting is
Yes .