User manual

ACP-2010MB User Manual 12
4. To install the optical disk drive and 3.5" FDD, undo the screws on the 5.25" disk
drive bracket.
5. Undo the screws on each side of the 5.25" disk drive bracket to remove the front
covers.
6. Slide the optical disk drive and the FDD into the bracket and fasten it on both
sides with the eight screws provided (see Figure 2.9). Return the 5.25" disk
drive bracket with the disk drives in the original position and reattach it inside the
chassis with the original screws.
7. Connect the suitable IDE or SATA cables from the motherboard to the 3.5" inter-
nal HDD, the optical disk drive, or FDD. Then, plug the power connector into
each disk drive.
Figure 2.8 Installing the optical disk drive and FDD