User manual

AIMB-560 User Manual 20
2.4 Parallel Port (CN4)
The parallel port is normally used to connect the motherboard to a printer.
The AIMB-560 includes an onboard parallel port, accessed through a 26-
pin flat-cable connector, CN4.
2.5 USB Ports (CN6, CN63, CN31, CN32)
The AIMB-560 provides up to eight ports of USB (Universal Serial Bus)
interface which gives complete Plug & Play and hot swapping for up to
127 external devices. The USB interface complies with USB Specifica-
tion Rev. 2.0 supporting transmission rate up to 480 Mbps and is fuse-
protected. The USB interface can be disabled in the system BIOS setup.
Figure 2.1: USB Ports