AIMB-C300 Multifunction Chassis for EmbATX motherboard User Manual
Copyright Advantech Co., Ltd copyrights this documentation and the software included with this product in 2005. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable.
FCC This device complies with the requirements in part 15of the FCC rule:Operation is subject to be following two conditions: (1)this device may not cause harmful interference (2)this device must accept any interference received, including interference that may cause undesired operation.
AIMB-C300 User Manual IV
Contents Chapter 1 General Information ........................................2 1.1 1.2 1.3 Introduction ....................................................................... 2 Specification...................................................................... 2 Power Supply ............................................................. 3 1.4 Dimension Diagram .......................................................... 4 Table 1.1:Power Supply ..........................................................
AIMB-C300 User Manual VI
CHAPTER 1 General Information
Chapter 1 General Information 1.1 Introduction The AIMB-C300 is a industrial computer chassis designed for space-conscious applications. Customers can expand their business without having to worry about space efficiency because the AIMB-C300 supports for Embedded ATX series industrial motherboards. Fast-growing Internet service providers and corporate enterprise customers can use the AIMBC300 as computing platforms for their mission critical applications.
• Shock resistance: 30 G acceleration, peak to peak, 11 ms (non-operating) 10 G acceleration peak to peak, 11 ms acceleration peak to peak (operating) • Vibration: 5 ~ 500 Hz, 0.5 G sine wave, and 5 ~ 500 Hz, 1 G (rms.) random • Dimensions (W x H x D): 383 x 362 x 90.9mm • Safety: CE compliant, C-UL approved 1.3 Power Supply Table 1.1: Power Supply Model Watt Input Name 1757000112 200W 90~264 (ATX, PFC) Vac(Full -range) Output Safety& MTBF +5 V @ 35 A +5V @ 3A UL1950, +3.3 V @ 20A +12V @ 2A CSA 22.
1.4 Dimension Diagram Figure 1.
CHAPTER 2 System Setup
Chapter 2 System Setup WARNING: Before starting the installation process, turn off the power switch and disconnect the system power cord from the chassis, or unplug the power cord from the power outlet. When in doubt, consult with an experienced technician. 2.1 Removing the top cover First, remove the chassis cover by two M3 screws, which are on the rear location of chassis. To remove the top cover: 1. Detach the two screws on the rear side. 2. Lift off the cover.
1.Standard drive bay. 2.HDD bay. 3.Front chassis door. The rear section includes: 1.Backplane. 2.Power supply with two fans. 3.Bracket for COM port 2.3 The HDD Drive Bay The HDD drive bay of the AIMB-C300 can hold up to two hard disk. Installing disk drives 1.Remove the top cover. 2.Detach the two screws holding the HDD bay. 3.Lift off the HDD bay. 4.Insert Hard Disks into their proper locations in the drive bay and secure them with the screws provided.(please refer to figure 2-2). 5.
Figure 2.3: Install the standard drive bay 2.4 The Standard Drive Bay The standard drive bay of the AIMB-C300 can hold one 3.5" FDD or Card reader (optional) and one Slim CD ROM. 1.Remove the top cover. 2.Detach the two screws holding the standard drive bay.(You could remove the power supply first, it will easier to insert drive bay). 3.Lift off the standard drive bay. 4.Insert the drives into their proper locations in the drive bay and secure them with the screws provided.(please refer to figure 2-4). 5.
Figure 2.5: Install the standard drive bay 2.5 PCI Riser card Please follow the below installation guide to install PCI riser card into AIMB-C300. 1. 32 bit PCI riser card Install the PCI riser card to the proper location with the provided two screws.(please refer to figure 2-6) Figure 2.6: PCI riser card 2. 64 bit PCI riser card First, you have to take away the screw on the original location to avoid the riser card damage.Then just install the riser card to the proper location with the two screws.
2.6 System Status Indicator Table 2.1: System Status LED LED Description RED GREEN or Orange PWR System Power N/A Normal HDD Hard Drive activity N/A Data access PWR LED turns on, it indicates system power on. HDD LED turns on, it indicates HDD data access 2.7 Cooling Fan & Filter There are dual cooling fans as shown in figure 2-7 located inside the chassis. The cooling fans are low maintenance and provide adequate cooling to the system.
Figure 2.8: System Filter 2.8 Front Panel Switches The front panel switches are used for system power and system reset. Power On/Off switch is used for switching the system on or off. The System Reset switch re-initializes the system. This switch is similar to the hardware reset button. Figure 2.
AIMB-C300 User Manual 12
Appendix Safety Instructions A
Appendix A Safety Instructions A.1 Safety Instructions 1. Read these safety instructions carefully. 2. Keep this User Manual for later reference. 3. Disconnect this equipment from any AC outlet before cleaning. Do not use a damp cloth, liquid or spray detergents for cleaning. 4. For plug-in equipment, the power outlet socket must be located near the equipment and must be easily accessible. 5. Keep this equipment away from humidity. 6. Put this equipment on a reliable surface during installation.
15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE STORAGE TEMPERATURE MAY GO BELOW -20× C (-4× F) OR ABOVE 60× C (140× F). THIS COULD DAMAGE THE EQUIPMENT. THE EQUIPMENT SHOULD BE IN A CONTROLLED ENVIRONMENT. The sound pressure level at the operator’s position according to IEC 7041:1982 is no more than 70dB(A). DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech disclaims all responsibility for the accuracy of any statements contained herein. 16.
AIMB-C300 User Manual 16
