User manual
Table Of Contents
- Chapter 1 Overview
- Chapter 2 Hardware Functionality
- 2.1 Introduction of ARK-3380 External I/O Connectors
- 2.2 ARK-3380 front metal face plate external I/O connectors
- 2.3 ARK-3380 rear metal face plate external I/O connectors
- Chapter 3 Hardware Installation and Upgrade
- 3.1 Jumpers and Connectors
- 3.2 Setting jumpers
- 3.3 COM2 RS-232/422/485 Jumper setting (J3/J4/J5)
- 3.4 LCD Power Jumper Setting (J6)
- 3.5 NTSC/PAL TV type Setting (J1)
- 3.6 Installing the DDR SDRAM Memory Module
- 3.7 Inserting a Compact Flash Card
- 3.8 Installing the 2.5" Hard Disk Drive (HDD)
- 3.9 Connecting Power
- Chapter 4 Award BIOS Setup
- 4.1 Introduction
- 4.2 Entering Setup
- 4.2.1 Main Menu
- 4.2.2 Standard CMOS Features
- 4.2.3 Advanced BIOS Features
- 4.2.4 Advanced Chipset Features
- 4.2.5 Integrated Peripherals
- 4.2.6 Power Management Setup
- 4.2.7 PnP/PCI Configurations
- 4.2.8 Frequency/Voltage Control
- 4.2.9 Load Optimized Defaults
- 4.2.10 Set Password
- 4.2.11 Save & Exit Setup
- 4.2.12 Quit Without Saving
- Chapter 5 PCI SVGA/LCD Setup
- Chapter 6 Full Disassembly Procedure
5 Chapter 1
16 VDC @ 3.4 A,
19 VDC @ 2.9 A,
24 VDC @ 2.3 A
• Output Voltage:
+5 VDC @ 7 A
+12 VDC @ 0.5 A
+5VSB @ 1 A
1.3.9 Environment Specifications
Operating Temperature
• When System is equipped with Industrial Grade Compact Flash Disk
only: -20 to 60° C
• When System is equipped with 2.5-inch Hard Disk: 0 to 45° C
Relative humidity 95 % @ 40 ° C(non-condensing)
Vibration loading during operation
• When system is equipped with Compact Flash Disk only:
5Grms, IEC 68-2-64, random, 5~500Hz, 1 Oct./min, 1hr/axis.
• When system is equipped with 2.5-inch hard disk:
1Grms, IEC 68-2-64, random, 5~500Hz, 1 Oct./min, 1hr/axis.
Shock during operation
• When system is equipped with Compact Flash Disk only:
50Grms, IEC 68-2-27, half sine, 11 ms duration
• When system is equipped with Hard Disk:
20Grms, IEC 68-2-27, half sine, 11 ms duration
EMC Approved: CE, FCC Class A
Safety Approved: UL