User manual
Table Of Contents
- Chapter 1 Overview
 - Chapter 2 Hardware Functionality
- 2.1 Introduction of ARK-3380 External I/O Connectors
 - 2.2 ARK-3380 front metal face plate external I/O connectors
 - 2.3 ARK-3380 rear metal face plate external I/O connectors
 
 - Chapter 3 Hardware Installation and Upgrade
- 3.1 Jumpers and Connectors
 - 3.2 Setting jumpers
 - 3.3 COM2 RS-232/422/485 Jumper setting (J3/J4/J5)
 - 3.4 LCD Power Jumper Setting (J6)
 - 3.5 NTSC/PAL TV type Setting (J1)
 - 3.6 Installing the DDR SDRAM Memory Module
 - 3.7 Inserting a Compact Flash Card
 - 3.8 Installing the 2.5" Hard Disk Drive (HDD)
 - 3.9 Connecting Power
 
 - Chapter 4 Award BIOS Setup
- 4.1 Introduction
 - 4.2 Entering Setup
- 4.2.1 Main Menu
 - 4.2.2 Standard CMOS Features
 - 4.2.3 Advanced BIOS Features
 - 4.2.4 Advanced Chipset Features
 - 4.2.5 Integrated Peripherals
 - 4.2.6 Power Management Setup
 - 4.2.7 PnP/PCI Configurations
 - 4.2.8 Frequency/Voltage Control
 - 4.2.9 Load Optimized Defaults
 - 4.2.10 Set Password
 - 4.2.11 Save & Exit Setup
 - 4.2.12 Quit Without Saving
 
 
 - Chapter 5 PCI SVGA/LCD Setup
 - Chapter 6 Full Disassembly Procedure
 
ARK-3380 User Manual iv
Declaration of Conformity
CE
This product has passed the CE test for environmental specifications 
when shielded cables are used for external wiring. We recommend the use 
of shielded cables. This kind of cable is available from Advantech. Please 
contact your local supplier for ordering information.
FCC Class A
Note: This equipment has been tested and found to comply with the limits 
for a Class A digital device, pursuant to part 15 of the FCC Rules. These 
limits are designed to provide reasonable protection against harmful 
interference when the equipment is operated in a commercial environ-
ment. This equipment generates, uses, and can radiate radio frequency 
energy and, if not installed and used in accordance with the instruction 
manual, may cause harmful interference to radio communications. Opera-
tion of this equipment in a residential area is likely to cause harmful inter-
ference in which case the user will be required to correct the interference 
at his own expense. 
Technical Support and Assistance
1. Visit the Advantech web site at www.advantech.com/support 
where you can find the latest information about the product.
2. Contact your distributor, sales representative, or Advantech's cus-
tomer service center for technical support if you need additional 
assistance. Please have the following information ready before you 
call:
- Product name and serial number
- Description of your peripheral attachments
- Description of your software (operating system, version, applica-
tion software, etc.)
- A complete description of the problem
- The exact wording of any error messages










