User manual
Table Of Contents
- Chapter 1 Overview
- Chapter 2 Hardware Functionality
- 2.1 Introduction of ARK-3380 External I/O Connectors
- 2.2 ARK-3380 front metal face plate external I/O connectors
- 2.3 ARK-3380 rear metal face plate external I/O connectors
- Chapter 3 Hardware Installation and Upgrade
- 3.1 Jumpers and Connectors
- 3.2 Setting jumpers
- 3.3 COM2 RS-232/422/485 Jumper setting (J3/J4/J5)
- 3.4 LCD Power Jumper Setting (J6)
- 3.5 NTSC/PAL TV type Setting (J1)
- 3.6 Installing the DDR SDRAM Memory Module
- 3.7 Inserting a Compact Flash Card
- 3.8 Installing the 2.5" Hard Disk Drive (HDD)
- 3.9 Connecting Power
- Chapter 4 Award BIOS Setup
- 4.1 Introduction
- 4.2 Entering Setup
- 4.2.1 Main Menu
- 4.2.2 Standard CMOS Features
- 4.2.3 Advanced BIOS Features
- 4.2.4 Advanced Chipset Features
- 4.2.5 Integrated Peripherals
- 4.2.6 Power Management Setup
- 4.2.7 PnP/PCI Configurations
- 4.2.8 Frequency/Voltage Control
- 4.2.9 Load Optimized Defaults
- 4.2.10 Set Password
- 4.2.11 Save & Exit Setup
- 4.2.12 Quit Without Saving
- Chapter 5 PCI SVGA/LCD Setup
- Chapter 6 Full Disassembly Procedure
ARK-3380 User Manual 34
4.2.1 Main Menu
During bootup, press <Del> to enter AwardBIOS CMOS Setup Utility;
the Main Menu will appear on the screen. Use arrow keys to select among
the items and press <Enter> to accept or enter a sub-menu.
• Standard CMOS Features
This setup page includes all the items in standard compatible BIOS.
• Advanced BIOS Features
This setup page includes all the Award advanced BIOS features items.
• Advanced Chipset Features
This setup page includes all the advanced chipset configuration items.
• Integrated Peripherals
This setup page includes all onboard peripheral devices.
• Power Management Setup
This setup page includes all the Power Management features items.
• PnP/PCI Configurations
This setup page includes PnP OS and PCI device configuration.
• Frequency/Voltage Control
This setup page includes CPU host clock control, frequency ratio and
voltage.
• Load Optimized Defaults
This setup page loads system optimized values, for the best system per-
formance configuration.
• Set Password
Establish, change, or disable password.
• Save & Exit Setup
Save CMOS value settings to CMOS and exit BIOS setup.
• Exit Without Saving
Abandon all CMOS value changes and exit BIOS setup.