User manual

23 Chapter 3

Figure 3.4: JP13/JP14/JP15 Jumper pin layout

3.8 COM7 RS-232 Jumper Setting

(JP16/JP17 Located on internal I/O board)

The COM7 port connector located on rear face plate of ARK-3381 unit

which can be configured and set up by the Jumper selections of JP16 and

JP17 located on internal I/O board of ARK-3381 unit. Please refer to

Table 3.6 to select the settings. The default setting is “DTR#5”.

(*): means default setting of the jumper/function

Table 3.6: COM7 (DTR#5/RTS#5) Jumper Selection

Function JP16

DTR#5 * 1-2 (closed)

RTS#5 2-3 (closed)

Table 3.7: COM7 (DCD#5/DSR#5/CTS#5/RI#5) Jumper Selection

Function JP17

DCD#5 * 1-2

DSR#5 3-4

CTS#5 5-6

RI#5 7-8