User's Manual

ARK-3384 User Manual 48
(hh:mm:ss) Alarm” fields. However, if the system is being accessed by
incoming calls or the network (Resume On Ring/LAN) prior to
the date and time set in these fields, the system will give priority
to the incoming calls or network.
Disabled: Disables the automatic power-on function. (default)
Figure 4.11: Power Management Setup
4.7.14 Date (of Month) Alarm
0 The system will power-on everyday according to the time set in the
“Time (hh:mm:ss) Alarm” field.
1-31 Select a date you would like the system to power-on. The system
will power-on on the set date, and time set in the “Time
(hh:mm:ss) Alarm” field.
4.7.15 Time (hh:mm:ss) Alarm
This is used to set the time you would like the system to power-on. If you
want the system to power-on everyday as set in the “Date (of Month)
Alarm” field, the time set in this field must be later than the time of the
RTC set in the Standard CMOS Features submenu.
4.7.16 Primary IDE 0/ 1 and Secondary IDE 0 / 1
When Enabled, the system will resume from suspend mode if Primary
IDE 0 / 1 or Secondary IDE 0 / 1 is active. The choice: Enabled, Disabled.