User Manual ARK-3360 Box IPC
ARK-3360 User Manual ii
Attention! Please note: This package contains a hard-copy user manual in Chinese for China CCC certification purposes, and there is an English user manual included as a PDF file on the CD. Please disregard the Chinese hard copy user manual if the product is not to be sold and/or installed in China.
Copyright The documentation and the software included with this product are copyrighted 2010 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable.
Product Warranty (2 years) Advantech warrants to you, the original purchaser, that each of its products will be free from defects in materials and workmanship for two years from the date of purchase. This warranty does not apply to any products which have been repaired or altered by persons other than repair personnel authorized by Advantech, or which have been subject to misuse, abuse, accident or improper installation.
Technical Support and Assistance 1. 2. Visit the Advantech web site at www.advantech.com/support where you can find the latest information about the product. Contact your distributor, sales representative, or Advantech's customer service center for technical support if you need additional assistance.
Ordering Information Model Number Description ARK-3360L-N4A1E Intel Atom N450 1.67 GHz Compact Embedded Box IPC, w/ 2 x GbE, 6 x USB 2.0, 4 x COM, 1x MiniCPIe, VGA, DIO, Audio ARK-3360L-D5A1E Intel Atom D510 1.67 GHz Compact Embedded Box IPC, w/ 2 x GbE, 6 x USB 2.0, 4 x COM, 1x Mini PCIe, VGA, DIO, Audio ARK-3360F-N4A1E Intel Atom N450 1.67 GHz Compact Embedded Box IPC, w/ 3 x GbE, 6 x USB 2.
Safety Instructions 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. Please read these safety instructions carefully. Please keep this User’s Manual for later reference. Please disconnect this equipment from AC outlet before cleaning. Use a damp cloth. Don’t use liquid or sprayed detergent for cleaning. Use moist sheet or cloth for cleaning. For pluggable equipment, the socket-outlet shall near the equipment and shall be easily accessible. Please keep this equipment from humidity.
Contents Chapter 1 General Introduction ...........................1 1.1 1.2 Introduction ............................................................................................... 2 Product Feature ........................................................................................ 2 1.2.1 General ......................................................................................... 2 1.2.2 Display ..........................................................................................
2.4 Chapter 3 3.1 3.2 3.3 3.4 ARK-3360 User Manual Figure 2.12Power Input Connector (ARK-3360L)....................... 18 Figure 2.13Power Input Connector (ARK-3360F) ...................... 18 Table 2.10: Power connector Pin Assignments (ARK-3360F) .... 18 Figure 2.14Power Button............................................................ 18 Figure 2.15LED Indicators.......................................................... 18 Installation................................................................
3.5 3.6 3.7 3.8 Boot Settings........................................................................................... 41 Figure 3.21Boot Setup Utility ...................................................... 41 3.5.1 Boot Settings Configuration ........................................................ 42 Figure 3.22Boot Setting Configuration........................................ 42 Security Setup......................................................................................... 43 Figure 3.
ARK-3360 User Manual xii
Chapter 1 1 General Introduction This chapter gives background information on ARK-3360 series.
1.1 Introduction ARK-3360 fanless Embedded Box Computer is an ideal, application-ready, system platform solution. All electronics are protected in a compact, sealed, aluminum case for easy embedding in the customer’s own housing, or as a stand-alone application where space is limited and the environment harsh. A solid sealed aluminum case provides vibration and dust resistance while also providing a passive cooling solution.
! ! ! ! Chipset: LAN1 Intel 82567, LAN2 Intel 82583V LAN3 Intel 82541PI (ARK-3360F only) Speed: 10/100/1000 Mbps Interface: 3 x RJ45 Standard: Compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3y, IEEE 802.ab. 1.3.1 Functional Specification 1.3.1.1 Processor Intel® AtomTM Processor N450/D510 Processor Intel® AtomTM N450/D510 at 1.67 GHz with 512 KB/1MB L2 cache Manufacturing Technology: 45 nm 1.3.1.
USB Interface SB: Intel® ICH8M chip supports: ! USB host interface with support for 6 USB 2.0 ports ! All ports are High-Speed, Full-Speed, and Low-Speed capable ! Supports legacy keyboard/mouse software Power Management SB: Intel® ICH8M chip supports: ! Supports ACPI 2.0 ! ACPI Power Management Logic Support BIOS SB: Intel® ICH8M chip supports: ! AMI 16Mb Flash BIOS via SPI 1.3.1.3 Others SMSC SCH 3114 support ! Up to 6 serial ports by SMSC SCH 3114.
Chapter 1 1.4 Mechanical Specifications 1.4.1 Dimensions 264.5 [10.41] x 69.2 [2.72] x 137.25 [5.4] Unit: mm [Inch] General Introduction Figure 1.1 ARK-3360 Mechanical dimension drawing 1.4.2 Weight 2.2 kg (4.4 lb) 1.5 Power Requirement 1.5.1 System Power ! Minimum power input: – ARK-3360L: DC12 V 3 A – ARK-3360F: DC12 V - 24 V, 3 A - 1.5 A 1.5.
1.6 Environment Specification 1.6.1 Operating Temperature ! ! With Industrial Grade CompactFlash disk: 0 ~ 60° C (32~131° F), when air flow speed = 0.7 m/sec With 2.5-inch extended temperature hard disk 0 to 45° C (32~113° F), when air flow speed = 0.7 m/sec 1.6.2 Relative Humidity ! 95% @ 40° C (non-condensing) 1.6.3 Storage Temperature ! -40 ~ 85° C (-40 ~ 185° F) 1.6.
Chapter 2 2 H/W Installation This chapter introduces external IO and the installation of ARK-3360 hardware.
2.1 Introduction The following sections show the internal jumper settings and the external connectors and pins assignment for applications. 2.2 Jumpers 2.2.1 Jumper Description You may configure the ARK-3360 to match the needs of your application by setting jumpers. A jumper is a metal bridge used to close an electric circuit. It consists of two metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them.
Chapter 2 2.2.2 Jumper List Table 2.1: Jumper List of Mother Board J2 COM2 Setting J3 AT / ATX Power SEL J4 Clear CMOS J5 Internal LVDS Panel Voltage Select JP1, JP2, JP3 COM3 type select JP4, JP5, JP6 COM4 type select JP7 COM5 type select JP8 COM6 type select JP9, JP10 COM2 type select 2.2.3 Jumper Location At Mother Board Figure 2.1 Jumper and connector layout (Mother Board) 9 ARK-3360 User Manual H/W Installation Table 2.
At MIO Board Figure 2.2 Jumper layout (MIO Board) 2.2.4 Jumper Setting At Mother Board J2 COM2 RS232/422/485 Select Part Number 1653003260 Footprint HD_3x2P_79 Description PIN HEADER 3*1P 180D(M) 2.0mm SMD SOUARE PIN Setting Function (1-2) RS232 (default) (2-3) RS485 (5-6) RS422 J3 ATX / AT Mode switch Part Number 1653002101 Footprint HD_3x2P_79_D Description PIN HEADER 2*1P 180D(M)SQUARE 2.
CLEAR CMOS 1653003101 Footprint HD_3x1P_79_D Description PIN HEADER 3*1P 180D(M) DIP SQUARE W/O Pb Setting Function NL NORMAL (Default) ON CLEAR CMOS J5 Internal LVDS PANEL POWER Select Part Number 1653003101 Footprint HD_3x1P_79_D Description PIN HEADER 3*1P 180D(M) 2.0mm DIP SQUARE W/O Pb Setting Function (1-2) 5 V for LVDS PANEL POWER (2-3) 3.
JP7 COM5 Type Select Part Number 1653002200 Footprint HD_2x2P_100_D Description PIN HEADER 2*2P 180D 2.54mm DIP WO/Pb Setting Function (1-2) RS-485 (Default) (2-3) RS-422 JP8 COM6 Type Select Part Number 1653002200 Footprint HD_2x2P_100_D Description PIN HEADER 2*2P 180D(M) 2.
Chapter 2 2.3 Connectors 2.3.1 ARK-3360 External I/O Connectors ARK-3360L: H/W Installation Figure 2.
Figure 2.4 ARK-3360F IO connectors drawing 2.3.1.1 COM Connector ARK-3360 provides six D-sub 9-pin connectors, which offers RS-232/422/485 serial communication interface ports. Default setting is RS-232, if you want to use RS-422/ 485, you can find the jumper installation in Appendix. 1 2 3 4 5 6 7 8 9 Figure 2.5 COM connector Table 2.
NC represents “No Connection”. 8 1 Figure 2.6 Ethernet connector Table 2.4: Ethernet Connector Pin Assignments Pin 10/100/1000BaseT Signal Name 1 TX+ 2 TX- 3 RX+ 4 MDI2+ 5 MDI2- 6 RX- 7 MDI3+ 8 MDI3- 2.3.1.3 Audio Connector ARK-3360 offers stereo audio ports by three phone jack connectors of Line_Out, Line_In, Mic_In. The audio chip is controlled by ALC888, and it’s compliant with Azalea standard. Figure 2.7 Audio connector Table 2.
2.3.1.4 DIO Connector ARK-3360F provides one phoenix 10-pin male connectors and ARK-3360L provides one DSUB 9-pin female connectors, which offer Digital Input/Output communication interface. If client want to use DIO, please find the Pin assignment as following. ARK-3360L 1 2 3 4 5 6 7 8 9 Figure 2.8 DIO Connector (ARK-3360L) Table 2.
Table 2.8: USB Connector Pin Signal name Pin Signal name 1 VCC 2 USB_data- 3 USB_data+ 4 GND 2.3.1.6 VGA Connector The ARK-3360 provides a high resolution VGA interface connected by a D-sub 15pin connector to support a VGA CRT monitor. It supports display resolution of up to 2048 x 1536 or 1400 x 1050. Figure 2.11 VGA Connector Table 2.
ARK-3360L Figure 2.12 Power Input Connector (ARK-3360L) ARK-3360F Figure 2.13 Power Input Connector (ARK-3360F) Table 2.10: Power connector Pin Assignments (ARK-3360F) Pin Signal Name 1 GND 2 +12~24 VDC 2.3.1.8 Power ON/OFF Button ARK-3360 comes with a Power On/Off button, that support dual function of Soft Power -On/Off (Instant off or Delay 4 Second), and Suspend. Figure 2.14 Power Button 2.3.1.
Chapter 2 2.4 Installation 2.4.1 HDD Installation 1. Unscrew the HDD door screws. H/W Installation Figure 2.16 Unscrew the HDD door screws 2. Assemble HDD and HDD frame with four screws. Figure 2.
3. Use the HDD damper screws to assemble the HDD door and HDD frame. Figure 2.18 Use the HDD damper screws to assemble the HDD door and HDD frame 4. Connect the HDD cables. Figure 2.19 Connect the HDD cables 5. Replace HDD door and secure with screws.
1. 2. Refer to section 2.4.1-1 to open the HDD door. Install the memory module into the SO-DIMM socket at the bottom of the main board. Chapter 2 2.4.2 Memory Installation H/W Installation Figure 2.20 Install the memory module into the SO-DIMM socket at the bottom of the Main board 3. Replace HDD door and secure with screws.
2.4.3 CF Card Installation 1. Unscrew the CF door screws. Figure 2.21 Unscrew the CF door screws 2. Pull the CF tray out. Figure 2.
Remove the black CF bracket. Chapter 2 3. H/W Installation Figure 2.23 Remove CF bracket 4. Put CF on to the CF tray. Figure 2.24 Put CF onto the CF tray 5. Push the CF tray back and secure with screws.
ARK-3360 User Manual 24
Chapter 3 3 BIOS Settings This chapter introduces how to set BIOS configuration data.
AMIBIOS has been integrated into many motherboards for over a decade. With the AMIBIOS Setup program, you can modify BIOS settings and control the various system features. This chapter describes the basic navigation of the ARK-3360 BIOS setup screens. Figure 3.1 Setup Program Initial Screen AMI’s BIOS ROM has a built-in Setup program that allows users to modify the basic system configuration. This information is stored in battery-backed CMOS so it retains the Setup information when the power is turned off.
When you first enter the BIOS Setup Utility, you will enter the Main setup screen. You can always return to the Main setup screen by selecting the Main tab. There are two Main Setup options. They are described in this section. The Main BIOS Setup screen is shown below. Chapter 3 3.2 Main Menu BIOS Settings Figure 3.2 Main Setup Screen The Main BIOS setup screen has two main frames. The left frame displays all the options that can be configured.
Figure 3.3 Advanced BIOS Features Setup Screen 3.3.1 CPU Configuration Figure 3.4 CPU Configuration Setting ! ! ! Max CPUID Value Limit This item allows you to limit CPUID maximum value. Execute-Disable Bit Capability This item allows you to enable or disable the No-Execution page protection technology. Hyper Threading Technology This item allows you to enable or disable Intel® Hyper Threading technology.
! ! Intel® SpeedStep® Tech When set to disabled, the CPU runs at its default speed, when set to enabled, the CPU speed is controlled by the operating system. Intel® C-STATE tech This item allows the CPU to save more power under idle mode. Enhanced C-States CPU idle set to enhanced C-States, disabled by Intel® C-STATE tech item. BIOS Settings 3.3.2 IDE Configuration Figure 3.5 IDE Configuration ! ! ! ! Chapter 3 ! ATA/IDE Configuration This item allows you to select Disabled / Compatible / Enhanced.
! IDE Detect Time Out (Sec) This item allows you to select the time out value for detecting ATA/ATAPI device(s). 3.3.3 Super I/O Configuration Figure 3.6 Super I/O Configuration ! ! ! ! ! ! ! Serial Port1 / Port2 / Port3 / Port 4 address (Port 3/4 only for ARK-3360L) This item allows you to select serial port1 ~ port4 of base addresses. Serial Port1 / Port2 / Port3 / Port 4 IRQ (Port 3/4 only for ARK-3360L) This item allows you to select serial port1 ~ port4 of IRQ.
Chapter 3 3.3.4 Hardware Health Configuration BIOS Settings Figure 3.7 Hardware Health Configuration ! ! H/W Health Function This item allows you to control H/W monitor of showing. Temperature & Voltage Show CPU/System Temperature Vcore / +3.3 Vin / +5 Vin / +12 Vin / VBAT 3.3.5 Secondary SuperI/O Configuration (Only for ARK-3360F) Figure 3.
! ! ! ! Serial Port3 / Port4 / Port5 / Port 6 Address This item allows you to select base addresses for serial ports 1 ~ 4. Serial Port3 / Port4 / Port5 / Port 6 IRQ This item allows you to select IRQs for serial ports 1 ~ 4. RS-485 Control for SP2 This item allows you to select RS485 control. SP 3/4/5/6 Auto Direction Control Select This item allows you to enable or disable auto flow control function. 3.3.6 ACPI Settings Figure 3.
Chapter 3 3.3.6.1 General ACPI Configuration BIOS Settings Figure 3.10 General ACPI Configuration ! ! Suspend Mode Select the ACPI state used for system suspend. Report Video on S3 Resume This item allows you to invoke VA BIOS POST on S3/STR resume. 3.3.6.2 Advanced ACPI Configuration Figure 3.
! ! ! ! ACPI Version Features This item allows you to enable RSDP pointers to 64-bit fixed system description tables. ACPI APIC support Include APIC table pointer to RSDT pointer list. AMI OEMB table Include OEMB table pointer to R(x)SDT pointer lists. Headless mode Enable / Disable Headless operation mode through ACPI. 3.3.6.3 Chipset ACPI Configuration Figure 3.12 Chipset ACPI Configuration ! ! ! ! Energy Lake Feature Allows you to configure Intel's Energy Lake power management technology.
Chapter 3 3.3.7 AHCI Setting BIOS Settings Figure 3.13 AHCI Setting ! AHCI Port0 / Port While entering setup, BIOS auto detects the presence of IDE devices. This displays the status of auto detection of IDE device. 3.3.8 APM Configuration Figure 3.
! ! ! ! ! ! ! ! ! ! Power Management/APM Enable or disable APM. Power Button Mode Power on, off, or enter suspend mode when the power button is pressed. The following options are also available. Restore on AC power Loss Use this to set up the system response after a power failure. The "Off" setting keeps the system powered off after power failure, the "On" setting boots up the system after failure, and the "Last State" returns the system to the status just before power failure.
! ! View Event Log View all unread events on the event Log. Mark all events as read Mark all unread events as read. Clear Event Log Discard all events in the event Log. Chapter 3 ! 3.3.10 MPS Configuration BIOS Settings Figure 3.16 MPS Configuration ! MPS Revision This item allows you to select MPS reversion.
3.3.11 Smbios Configuration Figure 3.17 Smbios Configuration ! Smbios Smi Support SMBIOS SMI wrapper support for PnP function 50h-54h. 3.3.12 USB Configuration Figure 3.
! ! 3.3.12.1 USB Mass Storage Device Configuration Figure 3.19 USB Mass storage Device Configuration ! ! USB Mass Storage Reset Delay Number of sends POST wait for the USB mass storage device after start unit command. Emulation Type If Auto, USB devices less than 530MB will be emulated as Floppy and remaining as hard drive. Force FDD option can be used to force a FDD formatted drive to boot as FDD (Ex. ZIP drive).
3.4 Advanced PCI/PnP Settings Select the PCI/PnP tab from the ARK-3360 setup screen to enter the Plug and Play BIOS Setup screen. You can display a Plug and Play BIOS Setup option by highlighting it using the keys. All Plug and Play BIOS Setup options are described in this section. The Plug and Play BIOS Setup screen is shown below. Figure 3.20 PCI/PNP Setup (top) ! ! ! ! ! ! ! Clear NVRAM Set this value to force the BIOS to clear the Non-Volatile Random Access Memory (NVRAM).
! ! IRQ3 / 4 / 5 / 7 / 9 / 10 /11 This item allows you respectively assign an interruptive type for IRQ-3, 4, 5, 7, 9, 10, 11. DMA Channel0 / 1 / 3 / 5 / 6 / 7 When set to Available will specified DMA is available to be used by PCI/PnP devices. When set to Reserved will specified DMA will Reserved for use by legacy ISA devices. Reserved Memory Size This item allows you to reserved size of memory block for legacy ISA device. Chapter 3 ! BIOS Settings 3.5 Boot Settings Figure 3.
3.5.1 Boot Settings Configuration Figure 3.22 Boot Setting Configuration ! ! ! ! ! ! ! ! Quick Boot This item allows BIOS to skip certain tests while booting. This will decrease the time needed to boot the system. Quiet Boot If this option is set to Disabled, the BIOS displays normal POST messages. If Enabled, an OEM Logo is shown instead of POST messages. AddOn ROM Display Mode Set display mode for option ROM. Bootup Num-Lock Select the Power-on state for Numlock.
Chapter 3 3.6 Security Setup BIOS Settings Figure 3.23 Password Configuration ! ! Select Security Setup from the ARK-3360 Setup main BIOS setup menu. All Security Setup options, such as password protection and virus protection are described in this section. To access the sub menu for the following items, select the item and press : Change Supervisor / User Password Boot sector Virus protection: The boot sector virus protection will warn if any program tries to write to the boot sector.
3.7 Advanced Chipset Settings Figure 3.24 Advanced Chipset Settings 3.7.1 North Bridge Chipset Configuration Figure 3.25 North Bridge Configuration ! ! DRAM Frequency This item allows you to manually changed DRAM frequency. Configure DRAM Timing by SPD This item allows you to enables or disables detect by DRAM SPD.
! ! Memory Hole This item allows you to free 15MB-16MB of memory size for some ISA devices. Initiate Graphic Adapter This item allows you to select which graphics controller to use as the primary boot device. Internal Graphics Mode Select: Select the amount of system memory used by the Internal graphics device. Chapter 3 ! 3.7.1.1 Video function configuration BIOS Settings Figure 3.26 Video function configuration ! ! ! ! ! DVMT Mode Select Displays the active system memory mode.
3.7.2 South Bridge Chipset Configuration Figure 3.27 South Bridge Configuration ! ! ! ! ! ! ! ! ! ! ! USB Functions Disabled, 2 USB Ports, 4 USB Ports, 6 USB Ports or 8 USB Ports. USB 2.0 Controller Enables or disables the USB 2.0 controller. Internal LAN3 Bootroom Enables or disables internal LAN boot with LAN3. Internal LAN2 controller Enables or disables the internal LAN controller with LAN2. Internal LAN2 Bootroom Enables or disables internal LAN boot with LAN2.
Chapter 3 3.8 Exit OS BIOS Settings Figure 3.28 Exit Option 3.8.1 Save Changes and Exit When you have completed system configuration, select this option to save your changes, exit BIOS setup and reboot the computer so the new system configuration parameters can take effect. 1. Select Exit Saving Changes from the Exit menu and press . The following message appears: Save Configuration Changes and Exit Now? [Ok] [Cancel] 2. Select Ok or cancel. 3.8.
3.8.4 Load Fail-Safe Defaults The ARK-3360 automatically configures all setup options to fail-safe settings when you select this option. Fail-Safe Defaults are designed for maximum system stability, but not maximum performance. Select Fail-Safe Defaults if your computer is experiencing system configuration problems. 1. Select Load Fail-Safe Defaults from the Exit menu and press . The following message appears: Load Fail-Safe Defaults? [OK] [Cancel] 2. Select OK to load Fail-Safe defaults.
Chapter 3 BIOS Settings 49 ARK-3360 User Manual
www.advantech.com Please verify specifications before quoting. This guide is intended for reference purposes only. All product specifications are subject to change without notice. No part of this publication may be reproduced in any form or by any means, electronic, photocopying, recording or otherwise, without prior written permission of the publisher. All brand and product names are trademarks or registered trademarks of their respective companies. © Advantech Co., Ltd.
