User manual

23 Chapter 3
3.7 Installing the 2.5" Hard Disk Drive (H D D)
You can attach one Serial ATA (SATA) hard disk drive to the ARK-
3389's internal controller. The following are instructions for installation:
1. Remove the power cord.
2. Unscrew the four screws from bottom cover of the ARK-3389.
3. Remove the bottom cover of the ARK-3389.
4. Connect the SATA cable to the connector on the hard disk.
5. Fixing your HDD to bottom cover by using the 4 scews stored in
accessories box.
6. Screw back the bottom cover with the four screws.
3.8 Connecting Power
Connect the ARK-3389 to a 12 ~ 24 VDC power source. The power
source can either be from a power adapter or an in-house power source.