User manual

ARK-3390 User Manual viii
2.4.3 CF card Installation..................................................................... 20
Figure 2.16Install the CF card into the CF slot at the bottom of the
Main board ............................................................... 20
2.4.4 RS-232/422/485 Jumper Setting ................................................ 20
Figure 2.17RS-232/422/485 jumper setting................................ 20
Chapter 3 BIOS Operation ................................. 21
3.1 BIOS Introduction.................................................................................... 22
3.2 BIOS Setup............................................................................................. 22
Table 3.1: CONTROL KEYS ..................................................... 22
3.2.1 Main Menu.................................................................................. 23
3.2.2 Standard CMOS Features .......................................................... 24
3.2.3 Advanced BIOS Features........................................................... 25
3.2.4 Advanced Chipset Features ....................................................... 26
3.2.5 Integrated Peripherals ................................................................ 28
3.2.6 Power Management Setup ......................................................... 30
3.2.7 PnP/PCI Configurations.............................................................. 32
3.2.8 PC Health Status ........................................................................ 33
3.2.9 Frequency/Voltage Control......................................................... 34
3.2.10 Load Optimized Defaults ............................................................ 34
3.2.11 Set Password.............................................................................. 35
3.2.12 Save & Exit Setup....................................................................... 37
3.2.13 Quit without Saving..................................................................... 37
Chapter 4 Full Disassembly Procedure............ 39
4.1 Introduction ............................................................................................. 40
Figure 4.1 Unscrew the bottom screws ..................................... 40
Figure 4.2 Unscrew the frame screws and remove the frame... 40
Figure 4.3 Unscrew the panel screws ....................................... 41
Figure 4.4 Unscrew the hex-bolts on the panel......................... 41
Figure 4.5 Unscrew the screw fixed AMO-3000 on MB............. 42
Figure 4.6 Remove AMO-3000 from MIO socket of the system
board ........................................................................ 42
Figure 4.7 Unscrew the power module screws on the bottom to
disassemble the power module................................ 43