User Manual ASMB-584 LGA 1150 Intel® Xeon® E3 V3 Micro ATX Server Board with 2 PCIe x16 slots (x8 link), 1 PCIe x4, 1 PCI, USB 3.
Copyright The documentation and the software included with this product are copyrighted 2013 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable.
A Message to the Customer Advantech Customer Services Each and every Advantech product is built to the most exacting specifications to ensure reliable performance in the harsh and demanding conditions typical of industrial environments. Whether your new Advantech equipment is destined for the laboratory or the factory floor, you can be assured that your product will provide the reliability and ease of operation for which the name Advantech has come to be known. Your satisfaction is our primary concern.
Declaration of Conformity FCC This device complies with the requirements in part 15 of the FCC rules: Operation is subject to the following two conditions: This device may not cause harmful interference This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Memory Compatibility Brand Size Speed ECC Vendor PN Advantech PN Transcend 1GB 1066 N 96D3-1G1066NN-TR Transcend 2GB 1066 N TS256MLK64V1U Apacer 1GB 1066 N 78.01GC3.420 TS128MLK64V1U Apacer 2GB 1066 N 78.A1GC3.421 96D3-2G1066NN-AP Apacer 4GB 1066 N 78.B1GDJ.AF1 N/A Transcend 1GB 1333 N TS128MLK64V3U 96D3-1G1333NN-TR Transcend 2GB 1333 N TS256MLK64V3U 96D3-2G1333NN-TR4 Transcend 4GB 1333 N TS512MLK64V3N 96D34G1333NN-TR Apacer 1GB 1333 N 78.01GC6.
ASMB-584 Ordering Information Memory LAN Display Port IPMI ASMB-584G2-00A1E C226 DDR3 ECC UNB/Non-ECC 2 2 Optional Module (IPMI-1000) ASMB-584VG-00A1E C226 DDR3 ECC UNB/Non-ECC 1 N/A N/A Part Number Chipset Product Warranty (2 years) Advantech warrants to you, the original purchaser, that each of its products will be free from defects in materials and workmanship for two years from the date of purchase.
If any of these items are missing or damaged, contact your distributor or sales representative immediately. We have carefully inspected the ASMB-584 mechanically and electrically before shipment. It should be free of marks and scratches and in perfect working order upon receipt. As you unpack the ASMB-584, check it for signs of shipping damage. (For example, damaged box, scratches, dents, etc.
ASMB-584 User Manual viii
Contents Chapter 1 Hardware Configuration......................1 1.1 1.2 1.3 1.9 1.10 1.11 1.12 1.13 Introduction ............................................................................................... 2 Features .................................................................................................... 2 Specifications ............................................................................................ 3 1.3.1 System ............................................................
2.11 2.12 2.13 2.14 2.15 2.16 2.17 2.18 2.19 2.20 Chapter 8-pin Alarm Board Connector (VOLT1)................................................... 21 Case Open Connector (JCASE1) ........................................................... 21 Front Panel LAN Indicator Connector (LANLED1).................................. 22 Table 2.2: Front Panel LAN Indicator Connector ...................... 22 Serial ATA Interface (SATA0~5) .............................................................
3.5 3.6 3.7 3.8 Chapter Chapter Chapter Chapter Chapter Chapter Figure 3.25USB Configuration.................................................... 51 Figure 3.26PCH Azalia ............................................................... 52 Figure 3.27LAN Configuration .................................................... 52 3.4.2 System Agent (SA) Configuration ............................................... 53 Figure 3.28System Agent (SA) Configuration............................. 53 Figure 3.
9.2 A.1 A.2 B.1 B.2 B.3 B.4 B.5 B.6 B.7 B.8 B.9 B.10 B.11 B.12 B.13 B.14 B.15 B.16 B.17 B.18 B.19 B.20 B.21 ASMB-584 User Manual SATA RAID Driver and Utility Setup ....................................................... 78 Watchdog timer overview........................................................................ 80 Programming the Watchdog Timer ......................................................... 80 Table A.1: Watchdog timer registers ......................................... 82 A.2.
Chapter 1 Hardware Configuration 1
1.1 Introduction ASMB-584 motherboard is designed with the most advanced Intel® C226 PCH for industrial server grade applications that require high-performance computing. The motherboard supports Intel® Xeon® E3 V3 processor with DDR3 1066/1333/ 1600MHz memory for up to 32 GB. ASMB-584 also provides cost-effective Intel HD graphics integrated on processor, and the graphics VRAM is 1 GB maximum shared memory with 2 GB and above system memory installed.
1.3.1 System SATA hard disk drive interface: Six on-board SATA III connectors support Advanced Host Controller Interface (AHCI) technology and have data transmission rates up to 600 MB/s. System Chipset: Intel® C226 RAM: Up to 32 GB in four 240-pin DIMM sockets. Supports dual-channel DDR3 ECC/Non-ECC 1066/1333/1600 SDRAM. Note! 1. Due to the inherent limitations of PC architecture, the system may not fully detect 32 GB RAM when 32 GB RAM is installed. 2.
1.3.6 Industrial Features Watchdog timer: It can generate system reset or NC. The watchdog timer is programmable, with each unit equal to one second (255 levels). 1.3.7 Mechanical and Environmental Specifications Operating temperature: 0 ~ 60° C (32 ~ 140° F, Depending on CPU) Storage temperature: -40 ~ 85° C (-40 ~ 185° F) Humidity: 5 ~ 95% non-condensing Power supply voltage: +3.3 V, +5 V, ±12 V, 5 VSB Power consumption: Max. load: +3.3 V @ 3.7 A, +5 V @ 2.22 A, +12 V @ 0.
Label Function ATXPWR1 ATX 24 Pin main power connector (for System) ATX12V1 Processor power connector (for CPU) SATA0~5 SATA III (6Gb/s) USB2 3 USB 3.0 Port 2 3 (Header) USB 2.0 Port 6~11 (Header) USB12 USB 2.0 Port 12 (USB Type A) PCIEX4_SLOT5 PCIE x4 slot PCIEX16_SLOT6, PCIEX16_SLOT7 PCIe x16 slot (x8 link) DIMMA0,DIMMA1,DIMMB0,DI DDR3 slot MMB1 CPUFAN0 CPU FAN connector SYSFAN0,SYSFAN1, SYSFAN2,SYSFAN3 System FAN connector LAN1_USB0 1,LAN2_USB4 5 LAN1 / USB 3.
1.
Chapter 1 1.6 ASMB-584 Block Diagram Block Diagram One PCIe x16 slot PCIe Gen 3.0 x8 One PCIe x16 slot PCIe Gen3.0 x8 Level Shifter DP Display Port DP Display Port DP One PCIe x 4 slot PCIe x4 (ECC) DDR3 1066/1333/1600 DVI Channel A (ECC) DDR3 1066/1333/1600 Intel LGA 1150 Haswell WS Processors (ECC) DDR3 1066/1333/1600 Channel B FDI DMI 4 USB 3.0 USB 3.0 PCIe x 1 ITE 8892F VGA D-Sub PCIe x 1 6 SATA Ports with RAID 0,1,5,10 600MB/s 9 USB 2.0 USB 2.0 Gen 1.
1.8 Jumper Settings This section provides instructions on how to configure your motherboard by setting the jumpers. It also includes the motherboard default settings and your options for each jumper. 1.8.1 How to set jumpers You can configure your motherboard to match the needs of your application by setting the jumpers. A jumper is a metal bridge that closes an electrical circuit.
Table 1.5: Watchdog timer output (JWDT1) Function Jumper Setting 1 NC 1 2 3 1-2 closed 2 3 2-3 closed * default setting Note! The interrupt output of the watchdog timer is a low level signal. It will be held low until the watchdog timer is reset. 1.8.1.4 USB power switch (JUSB1) The ASMB-584 contains a jumper that can support on board USB ports power source from +5Vsb or +5V. The default setting is 1-2 closed which is supports USB stand-by power under S5.
1.8.1.5 CPU,SYSTEM fan PWM/DC mode selection(CPUFAN_SEL1, SYSFAN_SEL1) The ASMB-584 contains a jumper that can support PWM or DC mode, Normally this jumper should be set with pin 1-2 closed. If you want to change to DC mode, set CPUFAN_SEL1, SYSFAN_SEL1 to 2-3 closed for disable. Table 1.7: (CPUFAN_SEL1, SYSFAN_SEL1) Function Jumper Setting *PWM mode 1 DC mode 1 2 3 1-2 closed 2 3 2-3 closed Table 1.
The ASMB-584 supports a CPU with one of the following built-in full speed L3 caches: The built-in third-level cache in the processor yields much higher performance than conventional external cache memories. 8 MB for 4th Generation Intel Xeon E3-1275 V3 CPU 8 MB for 4th Generation Intel Xeon-E3-1225 V3 CPU 8 MB for 4th Generation Intel Xeon-E3-1268 V3 CPU The ASMB-584 is designed for LGA1150, Intel Xeon® E3 V3 processor. 1.
ASMB-584 User Manual 12
Chapter 2 Connecting Peripherals 2
2.1 Introduction You can access most of the connectors from the top of the board as it is being installed in the chassis. If you have a number of cards installed, you may need to partially remove a card to make all the connections. 2.2 Parallel Port (LPT1) LPT1 The parallel port is normally used to connect the motherboard to a printer. The ASMB-584 includes an onboard parallel port, accessed through a 25-pin flat-cable connector, LPT1.
LAN2_USB45 LAN1_USB01 USB6~11 USB10 11 US8 9 USB6 7 USB2 3 USB12 USB12 USB34 LAN1_USB01 LAN2_USB23 USB23 LAN 1/2 LED Indicator LAN Mode LAN Indicator 1 Gbps Link on LED1 Green on (left) 100 Mbps Link on LED1 Orange on (left) 10 Mbps Link on LED1 N/A (left) Active LED2 Green flash (right) 15 ASMB-584 User Manual Connecting Peripherals ASMB-584 provides up 13 USB ports. USB4~14 are USB 2.0 ports supporting transmission rates up to 480 Mbps, and USB0~3 are USB 3.
2.4 USB Power Switch Jumper USB Ports JUSB1 USB port 2,3,and 6~12 JUSB1 ASMB-584 allows user to set USB power between +5VSB and +5V. When the jumper is set as +5V, the board doesn't support S3/S4. Note! When USB power is switched to +5V, it can't be connected with powered KVM.
Chapter 2 2.5 VGA Connector (VGA1) VGA+DVI1 1 10 6 15 11 The ASMB-584 includes a VGA interface that can drive conventional CRT displays. Pin assignments of VGA1 are detailed in Appendix B. 2.6 Serial Ports (COM1, COM2) COM2 COM1 COM1&2 The ASMB-584 offers two serial ports (both are onboard pin-headers). Both ports can connect to a serial mouse, printer or communications network. The IRQ and address ranges for those ports are fixed.
2.7 External Keyboard & Mouse (KBMS2) KBMS2 There is also an extra onboard external keyboard and mouse connector on the motherboard. This gives system integrators greater flexibility in designing their systems. 2.8 CPU Fan Connector (CPUFAN1) CPUFAN_SEL1 CPUFAN0 If a fan is used, this connector supports cooling fans that draw up to 500 mA (6 W).
SYSFAN3 STYSFAN1 SYSFAN2 STYSFAN3 SYSFAN_SEL1 SYSFAN2 SYSFAN1 SYSFAN0 If a fan is used, this connector supports cooling fans that draw up to 1A (12W). 2.10 Front Panel Connectors (JFP1) There are several external switches and LEDs to monitor and control the ASMB-584. JFP1 3 6 9 12 PWRSW RESET & 5 4 8 7 11 10 HDDLED SNMP SM_BUS JPF2 2 1 JFP3 1 2 3 4 SPEAKER 5 PWRLED & KEYLOCK JFP1 19 ASMB-584 User Manual Connecting Peripherals SYSFAN0 Chapter 2 2.
2.10.1 Power LED (JFP3) JFP3 is a 5-pin connector for the power LED. Refer to Appendix B for detailed information on the pin assignments. If a PS/2 or ATX power supply is used, the system’s power LED status will be as indicated as follows. Table 2.1: PS/2 or ATX power supply LED status Power mode LED (PS/2 power) LED (ATX power) System On On On System Suspend Fast Flash Fast Flash System Off Off Off System Off in deep sleep Off Off 2.10.
Chapter 2 2.11 8-pin Alarm Board Connector (VOLT1) VOLT1 connects to the alarm board of Advantech chassis. These alarm boards give warnings if a power supply or fan fails, if the chassis overheats. 2.12 Case Open Connector (JCASE1) JCASE1 JCASE1 is for chassis with a case open sensor. The buzzer on the motherboard sounds if the case is opened.
2.13 Front Panel LAN Indicator Connector (LANLED1) Table 2.2: Front Panel LAN Indicator Connector Pin Signal Pin Signal 1 LAN1_LED0_ACT 2 LAN2_LED1_ACT 3 VCC3_LAN1LED 4 VCC3_LAN2LED 6 LAN1_LED1_1000M 6 LAN2_LED2_1000M 7 LAN1_LED2_100M 8 LAN2_LED0_100M 9 VCC3 10 NC LANLED1 2.14 Serial ATA Interface (SATA0~5) SATAIII 02 4 13 5 ASMB-584 features six high performance serial ATA III interfaces (up to 600 MB/s, blue connector).
Chapter 2 2.15 PCI Slots (PCI_SLOT4) PCI_SLOT4 2.16 PCIe x16 slots (x8 link) Expansion Slot (PCIEX16_SLOT6 and PCIEX16_SLOT7) PCIEX16_SLOT6 PCIEX16_SLOT7 The ASMB-584 provides two PCIe x16 slots (x8 link) for users to install add-on VGA cards when their applications require higher graphics performance than the CPU embedded graphics controller can provide, or high bandwidth demanded I/O card, such as frame grabber card, raid card and 10G LAN card.
2.17 PCIe x4 Expansion Slot (PCIEX4_SLOT5) PCIEX4_SLOT5 2.18 Auxiliary 8-pin power connector (ATX12V1) For a fully configured system, we recommend that you use a power supply unit (PSU) that complies with ATX 12 V Specification 2.0 (or later version). Do not forget to connect the 8-pin EATX12 V power plug; otherwise, the system will not boot.
SPI flash card pin header which can flash BIOS while ASMB-584 can not be power on and ensures platform integrity. Connecting Peripherals SPI_CN1 2.20 Low Pin Count Connector (LPC1) LPC1 LPC connector on AIMB-584 is reserved for Advantech LPC modules Table 2.3: Advantech LPC Module List Pin Signal PCA-TPM-00A1E TPM Module 25 Chapter 2 2.
ASMB-584 User Manual 26
Chapter 3 BIOS Operation 3
3.1 Introduction AMIBIOS has been integrated into myriad motherboards for decades. In the past, people often referred to the AMIBIOS setup menu as BIOS, BIOS setup or CMOS setup. With the AMIBIOS Setup program, you can modify BIOS settings and control the special features of your computer. The Setup program uses a number of menus for making changes and turning the special features on or off. This chapter describes the basic navigation of the ASMB-584 setup screens. Figure 3.
Press or at bootup to enter AMI BIOS CMOS Setup Utility, the Main Menu will appear on the screen. Use arrow keys to select among the items and press to accept or enter the sub-menu. Chapter 3 3.2.1 Main Menu BIOS Operation Figure 3.2 Main setup screen The Main BIOS setup screen has two main frames. The left frame displays all the options that can be configured. Grayed-out options cannot be configured; options in blue can be. The right frame displays the key legend.
3.3 Advanced BIOS Features Setup Select the Advanced tab from the ASMB-584 setup screen to enter the Advanced BIOS setup screen. You can select any of the items in the left frame of the screen, such as CPU configuration, to go to the sub menu for that item. You can display an Advanced BIOS Setup option by highlighting it using the keys. All Advanced BIOS Setup options are described in this section. The Advanced BIOS Setup screens are shown below. The sub menus are described on the following pages.
Chapter 3 3.3.1 PCI Subsystem Settings BIOS Operation Figure 3.4 PCI subsystem settings screen PCI Latency Timer Value in units of PCI clocks for PCI device latency timer register. VGA Palette Snoop This item is designed to solve problems caused by some non-standard VGA cards. Figure 3.
Relaxed Ordering This item is to enable or disable PCIe device relaxed ordering. Extended Tag If this item is [Enabled], it allows device to use 8-bit tag field as a requester. No Snoop This item is to enable or disable PCIe device with “No Snoop” option. Maximum Payload This item is to set maximum payload of PCIe device or allow system BIOS to select the value. Maximum Read Request This item is to set maximum read request size of PCIe device or allow system BIOS to select the value.
Chapter 3 3.3.2 ACPI Settings BIOS Operation Figure 3.6 ACPI Settings Enable Hibernation "Enable” or “disable" Hibernation. ACPI Sleep State Specifies the ACPI sleep state when the system enters suspend. Lock Legacy Resources "Enable" or "Disable" Lock Legacy Resources. S3 Video Repost This item is to enabled or disabled S3 video repost.
3.3.3 Trusted Computing Figure 3.7 TPM Settings Security Device Support “Enable” or “disable” TPM Support. You can purchase Advantech LPC TPM module to enable TPM function.
Chapter 3 3.3.4 CPU Configuration BIOS Operation Figure 3.8 CPU Configuration Hyper-threading This item allows you to enable or disable Intel Hyper Threading technology. Active Processor Core Use this to select how many processor cores you want to activate when you are using a dual or quad core processor. Overclocking lock This item is to enable or disabled FLEX_RATIO(194) MSR.
Adjacent Cache Line Prefetch The Adjacent Cache-Line Prefetch mechanism, like automatic hardware prefetch, operates without programmer intervention. When enabled through the BIOS, two 64byte cache lines are fetched into a 128-byte sector, regardless of whether the additional cache line has been requested or not. You may choose to enable or disable it. CPU AES This item is to enable or disable CPU advanced encryption standard instructions. EIST This item is to enable or disable Intel Speedstep function.
Chapter 3 3.3.5 SATA Configuration BIOS Operation Figure 3.9 SATA Configuration SATA Controller(s) This item is to enable or disable SATA devices. SATA Mode Selection Set as IDE, AHCI, or RAID when SATA Controllers are enable. SATA Controller Speed Sets the maximum speed of SATA controllers, and there are three modes, Gen1, Gen2, and Gen3. OROM UI Delay When this item is enable, user is able to indicate the delay of the OROM UI Splash Screen in a normal status.
3.3.6 PCH-FW Configuration Figure 3.
Chapter 3 3.3.7 AMT Configuration BIOS Operation Figure 3.11 AMT Configuration Intel AMT Enable or Disable Intel Active Management Technology BIOS Extension. BIOS Hotkey Pressed To enable or disable BIOS hotkey press. MEBx Selection Screen “Enable or Disable” MEBx selection screen. Hide Un-Configure ME Confirmation Hide un-configuration ME without password confirmation prompt. MEBx Debug Message Output Enable MEBx debug message output. Un-Configure ME To un-configure ME without password.
3.3.8 USB Configuration Figure 3.12 USB Configuration Legacy USB Support This is for supporting USB devices under legacy OS such as DOS. When choosing "AUTO", the system will automatically detect if any USB device is plugged into the computer and enable USB legacy mode and disable USB legacy mode when no USB device is plugged in. USB3.0 Support Enables or disables USB 3.0 (XHCI) support XHCI Hand-off Enables or disables support for OS without XHCI hand-off features.
Chapter 3 3.3.9 SMART Settings BIOS Operation Figure 3.13 SMART Setting SMART Self Test This item is to enable or disable SMART self test on all HDDs during post.
3.3.10 Super IO Configuration Figure 3.14 Super IO Configuration Figure 3.
Chapter 3 BIOS Operation Figure 3.16 Serial Port 2 Configuration Figure 3.17 Parallel Configuration Serial Port 1 Configuration Serial Port “Enable” or “disable” Serial Port 1.
Change Settings Select optimal settings for serial port 1. Serial Port 2 Configuration Serial Port “Enable” or “disable” Serial Port 2. Change Settings Select optimal settings for serial port 2. Parallel Port “Enable” or “disable” Parallel Port. Change Settings Select optimal settings for parallel port. Device Mode To change the printer port mode. 3.3.11 H/W Monitor Figure 3.18 PC Health Status CPU Temperature (PECI) CPU temperature shown here is CPU T-junction temperature via PECI.
Chapter 3 ACPI Shutdown Temperature Use this to set the ACPI shutdown temperature threshold. When the system reaches the shutdown temperature, it will be automatically shut down by ACPI OS to protect the system from overheat damage. Smart Fan Enable or Disable CPU FAN and System FAN Mode to SMART FAN setting. 3.3.12 Serial Port Console Redirection BIOS Operation Figure 3.19 Serial Port Console Redirection Console Redirection Enable or disable the console redirection feature.
Figure 3.20 Console Redirection Setting Terminal Type Select a terminal type to be used for console redirection. Options available: VT100/VT100+/ANSI /VT-UTF8. Bits per second Select the baud rate for console redirection. Options available: 9600/19200/57600/115200. Data Bits This item is to set data bits between [8] or [7]. Parity A parity bit can be sent with the data bits to detect some transmission errors. Even: parity bit is 0 if the num of 1's in the data bits is even.
ASMB-584 User Manual BIOS Operation 47 Chapter 3 Flow Control Flow control can prevent data loss from buffer overflow. When sending data, if the receiving buffers are full, a 'stop' signal can be sent to stop the data flow. Once the buffers are empty, a 'start' signal can be sent to re-start the flow. Hardware flow control uses two wires to send start/stop signals. Options available: None/Hardware RTS/CTS. VT-UTF8 Combo Key Support To enable VT-UTF8 combination key for supporting ANSI/VT100 terminals.
3.4 Chipset Figure 3.21 Chipset 3.4.1 PCH-IO Configuration Figure 3.
When a system enters G3 status with deep S5 enabled, some power supply's 5VSB won't drop until after more than 30 seconds. If "Restore AC Power Loss" is set to "power on", the system won't boot up in 30 seconds after power failure. We recommend the user waits for more than 30 seconds to power on after a power failure. On the other hand, the system will auto power on if power is restored within 30 seconds, before 5VSB actually drops, even if "Restore AC Power Loss" is set to "power off". Figure 3.
Figure 3.24 PCI Express Slot 5 Configuration PCI Express Slot 5 To enable or disable PCI Express Slot 5. ASPM Support To set ASPM level for PCI Express Slot 5. PCIe Speed To set PCIe speed for PCI Express Slot 5. Detect Non-Compliance Device Detect Non-compliance PCIE device. When this item is enabled, it will take more time during POST.
Chapter 3 BIOS Operation Figure 3.25 USB Configuration USB Precondition Pre-condition work on USB host controller and root ports for faster enumeration. XHCI Mode Mode of operation of XHCI controller. USB Ports Pre-Port Disable Control Enable or disable USB port#0~13.
Figure 3.26 PCH Azalia Azalia Control detection of Azalia device. Figure 3.27 LAN Configuration LAN1 Controller Enable or disable onboard LAN1.
BIOS Operation 3.4.2 System Agent (SA) Configuration Figure 3.28 System Agent (SA) Configuration VT-d To enable or disable VT-d function on MCH. 53 Chapter 3 LAN1 PXE OpROM Enable or disable boot options for legacy network devices. Wake on LAN1 Enable or disable integrated LAN to wake the system. LAN2 Controller Enable or disable onboard LAN2 LAN2 OpROM Enable or disable boot options for legacy network devices.
3.4.2.1 Graphics Configuration Figure 3.29 Graphics Configuration Primary Display To select which graphics device, IGFX/PEG/PCI should be primary display or select SG for switchable Gfx. Primary PEG Select which PEG port as a primary PEG when primary PEG is set as [PEG] or [PCIE]. Internal Graphics To enable/disable/Auto internal graphics. GTT Size This item sets the amount of main memory that is pre-allocated to support the Internal Graphics Translation Table.
Chapter 3 3.4.2.2 NB PCIe Configuration BIOS Operation Figure 3.30 NB PCIe Configuration PEG0~2 - Genx To configure PEG0~2 as Gen1,Gen2 or Gen3. Enable PEG To enable or disable the PEG. Detect Non-Compliance Device Detect Non-compliance PCIE device in PEG. Program PCIe ASPM after OpROM [Enable] : PCIe ASPM will be programmed after OpROM. [Disable] : PCIe ASPM will be programmed before OpROM. PEG0~2 De-emphasis Control Configure the De-emphasis control on PEG0~2.
3.4.2.3 Memory Configuration Figure 3.31 Memory Configuration Memory Frequency Limiter To set the maximum memory frequency between [1067],[1333] and [1600].
Chapter 3 3.5 Boot BIOS Operation Figure 3.32 Boot Setup Prompt Timeout Use the <+> and <-> keys to adjust the number of seconds to wait for setup activation key. Bootup NumLock State “On” or “Off” power-on state for the NumLock Quiet Boot If this option is set to Disabled, the BIOS displays normal POST messages. If Enabled, an OEM Logo is shown instead of POST messages. Boot Option Priorities Choose boot priority from boot device.
Figure 3.33 CSM16 Parameters GateA20 Active This items is useful When RT code is executed above 1MB. When this it's set as "UPON RQUEST", GA20 can be disabled using BIOS services. When it's set as "Always", it does not allow disabling GA20. Option ROM Messages “Force BIOS or Keep Current” to set the display mode for Option ROM INT19 Trap Response This item is a BIOS reaction on INT19 trapping by Option ROM. When it's set as "Immediate", the trap will be executed right away.
Chapter 3 3.6 Security BIOS Operation Figure 3.34 Security Select Security Setup from the ASMB-584 Setup main BIOS setup menu. All Security Setup options, such as password protection, are described in this section. To access the sub menu for the following items, select the item and press .
3.7 Save & Exit Figure 3.35 Save & Exit Save changes and exit* When you have completed system configuration, select this option to save your changes, exit BIOS setup and boot into the OS so the new system configuration parameters can take effect. Discard changes and exit Select this option to quit setup without making any permanent changes to the system configuration.
*When you do some critical changes, the system will still reboot even you choose "Save changes and exit". Chapter 3 Launch EFI Shell from file system device This option allows you to attempt to launch the EFI Shell application (shellx64.efi) from one of the available file system devices. 3.8 Server Management BIOS Operation Figure 3.36 Server Management BMC Support Enable/Disable interfaces to communicate with BMC (IPMI-1000 module).
3.8.1 BMC Self Test Log Figure 3.
Chapter 3 3.8.2 System Event Log BIOS Operation Figure 3.
3.8.3 BMC Network Configuration Figure 3.39 BMC network configuration Configuration Address Source Select to configure LAN channel parameters statically or dynamically (by BMC /IPMI1000 module). Unspecified will not modify any BMC (IPMI-1000 module) network parameters during BIOS posting phase.
Chapter 4 Chipset Software Installation Utility 4
4.1 Before You Begin To facilitate the installation of the enhanced display drivers and utility software, read the instructions in this chapter carefully. The drivers for the ASMB-584 are located on the software installation CD. Note! The files on the software installation CD are compressed. Do not attempt to install the drivers by copying the files manually. You must use the supplied SETUP program to install the drivers.
Insert the driver CD into your system's CD-ROM drive. You can see the driver folders items. Move the mouse cursor over the folder "01-Chipset". In CSI folder, you can click find an executable file to complete implementation of the driver. Chapter 4 4.
ASMB-584 User Manual 68
Chapter 5 VGA Setup 5
5.1 Introduction The Intel® Core™ i processors are embedded with integrated graphics controller. You need to install the VGA driver to enable this function, which includes the following features: Optimized integrated graphic solution: With Intel® Graphics Flexible Display Interface, it supports versatile display options and 32-bit 3D graphics engine.
Chapter 6 6 LAN Configuration
6.1 Introduction The ASMB-584 has two Gigabit Ethernet LANs via dedicated PCI Express x1 lanes (GbE LAN1: Intel I217LM; GbE LAN2: Intel I210-AT that offer bandwidth of up to 500 MB/sec, eliminating the bottleneck of network data flow and incorporating Gigabit Ethernet at 1000 Mbps. 6.2 Features 10/100/1000 Mbps Ethernet controller 10/100/1000 Mbps triple-speed MAC Full duplex at 10, 100, or 1000 Mbps and half duplex at 10 or 100 Mbps Wake-on-LAN (WOL) support PCIe x1 host interface 6.
Chapter 7 Intel ME 7
7.1 Introduction The Intel ME software components that need to be installed depend on the system's specific hardware and firmware features. The installer detects the system's capabilities and installs the relevant drivers and applications. 7.2 Installation Insert the driver CD into your system's CD-ROM drive. Navigate to the "05. Other" folder and find folder "Intel ME" to install the driver.
Chapter 8 Intel USB 3.
8.1 Introduction ASMB-584 provides Intel® USB 3.0 and the data transfer rate of USB3.0(5Gbps) is 10 times to USB2.0(480Mbps). 8.2 Installation Insert the driver CD into your system's CD-ROM drive. Navigate to the ""05. Other" folder and find "Intel USB3.0" folder to install the driver. Note! The Intel® USB 3.0 eXtensible Host Controller Driver is not supported on Windows* XP and Windows* Vista. For these operating systems, ensure your BIOS settings have the xHCI Mode set to "Auto" or "Smart Auto".
Chapter 9 SATA RAID Setup 9
9.1 Introduction To support demanding disk I/O, Intel C226 chipset integrates six Serial ATA controllers with software RAID 0, 1, 5, 10 capabilities. RAID 0 striping increases the storage performance and is designed to speed up data transfer rates for disk-intensive applications. RAID 1 mirroring protects valuable data that might be lost in the event of a hard drive failure. RAID 5 array contains three or more hard drives where the data is divided into manageable blocks called strips.
Appendix A A Programming the Watchdog Timer
The ASMB-584’s watchdog timer can be used to monitor system software operation and take corrective action if the software fails to function within the programmed period. This section describes the operation of the watchdog timer and how to program it. A.1 Watchdog timer overview The watchdog timer is built in to the super I/O controller NCT6776F.
Appendix A Programming the Watchdog Timer Unlock NCT6776F Select register of watchdog timer Enable the function of the watchdog timer Use the function of the watchdog timer Lock NCT6776F 81 ASMB-584 User Manual
Table A.1: Watchdog timer registers Address of Read/ register (2E) Write Value (2F) & description 87 (hex) - Write this address to I/O address port 2E (hex) twice to unlock the NCT6776F 07 (hex) write Write 08 (hex) to select register of watchdog timer. 30 (hex) write Write 01 (hex) to enable the function of the watchdog timer. Disabled is set as default. write Set seconds or minutes as units for the timer. Write 0 to bit 3: set seconds as counting unit. [default].
83 ASMB-584 User Manual Appendix A Programming the Watchdog Timer Dec dx ; Set second as counting unit Mov al,0f5h Out dx,al Inc dx In al,dx And al,not 08h Out dx,al ;----------------------------------------------------------Dec dx ; Set timeout interval as 10 seconds and start counting Mov al,0f6h Out dx,al Inc dx Mov al,10; 10 minutes Out dx,al ;----------------------------------------------------------Dec dx ; lock NCT6776F Mov al,0aah Out dx,al Enable watchdog timer and set 5 minutes as the timeout i
Out dx,al ;----------------------------------------------------------Dec dx ; Set timeout interval as 5 minutes and start counting Mov al,0f6h Out dx,al Inc dx Mov al,5; 5 minutes Out dx,al ;----------------------------------------------------------Dec dx ; lock NCT6776F Mov al,0aah Out dx,al Enable watchdog timer to be reset by mouse ;----------------------------------------------------------Mov dx,2eh ; unlock NCT6776F Mov al,87h Out dx,al Out dx,al ;-------------------------------------------------------
85 ASMB-584 User Manual Appendix A Programming the Watchdog Timer ;----------------------------------------------------------Mov dx,2eh ; unlock NCT6776F Mov al,87h Out dx,al Out dx,al ;----------------------------------------------------------Mov al,07h ; Select registers of watchdog timer Out dx,al Inc dx Mov al,08h Out dx,al ;----------------------------------------------------------Dec dx ; Enable the function of watchdog timer Mov al,30h Out dx,al Inc dx Mov al,01h Out dx,al ;-----------------------
Out dx,al Inc dx In al,dx Or al,01h Out dx,al ;----------------------------------------------------------Dec dx ; Generate a time-out signal Mov al,0f7h Out dx,al ;Write 1 to bit 5 of F7 register Inc dx In al,dx Or al,20h Out dx,al ;----------------------------------------------------------Dec dx ; lock NCT6776F Mov al,0aah Out dx,al ASMB-584 User Manual 86
Appendix B B I/O Pin Assignments
B.1 Parallel Port (LPT1) 25 23 3 1 24 2 Table B.1: Parallel Port (LPT1) Pin Signal Pin Signal 1 STROBE* 14 GND* 2 AFD* 15 D6 3 D0 16 IGND 4 ERR* 17 D7 5 D1 18 GND 6 INIT* 19 ACK* 7 D2 20 GND 8 SLIN* 21 BUSY 9 D3 22 GND 10 GND 23 PE 11 D4 24 GND 12 GND 25 SLCT 13 D5 26 N/C B.2 USB2.0 Header (USB6~11) 2 10 1 USB8_9 USB6_7 USB10_11 Table B.
Table B.3: USB 3.0 Header (USB2_3) Pin Signal Pin Signal 1 +5V_USB2_3 20 NC 2 USB3_RX_DN5 19 +5V_USB2_3 3 USB3_RX_DP5 18 USB3_RX_DN6 4 GND 17 USB3_RX_DP6 5 USB3_TX_DN5 16 GND 6 USB3_TX_DP5 15 USB3_TX_DN6 7 GND 14 USB3_TX_DP6 8 USB2_N2 13 GND 9 USB2_P2 12 USB2_N3 10 USB_OC 11 USB2_P3 B.4 VGA Connector (VGA) 5 1 10 6 15 11 Table B.
B.5 RS-232 Interface (COM12) 2 2 1 9 1 COM1 9 COM2 Table B.5: RS-232 Interface (COM12) COM1/COM2 Pin Signal 1 DCD 2 DSR 3 SIN 4 RTS 5 SOUT 6 CTS 7 DTR 8 RI 9 GND B.6 External Keyboard and Mouse Connector (KBMS2) Table B.
Table B.7: Fan Power Connector Pin Signal 1 GND 2 +12 V 3 DETECT 4 PWM B.8 Power LED and Keyboard Lock (JFP3) Table B.8: Power LED and Keyboard Lock (JFP3) Pin Function 1 LED power + (3.3 V) 2 NC 3 LED power - 4 #keylock 5 Ground B.9 External Speaker Connector (JFP2) 1 4 7 10 Table B.9: External Speaker Connector (JFP2) Pin Function 1 SPK_VCC 4 SPK_OBS 7 SPK_BUZ 10 SPK_OUT 91 ASMB-584 User Manual Appendix B I/O Pin Assignments B.
B.10 Reset Connector (JFP1) 9 12 Table B.10: Reset Connector (JFP1) Pin Signal 9 RESET 12 GND B.11 HDD LED Connector (JFP2) 2 5 Table B.11: HDD LED Connector (JFP2) Pin Signal 2 HDD_LED+ 5 HDD_LED- B.12 ATX Soft Power Switch (JFP1) 3 6 Table B.
LAN1_USB01 LAN2_USB23 Table B.13: USB Port Pin Signal Pin Signal 1 VCC_DUAL 3 Data0+ 2 Data0- 4 GND Table B.14: Giga LAN 10/100/1000 Mbps RJ-45 port Pin Signal Pin Signal 1 MID0+ 5 MID2+ 2 MID0- 6 MID2+ 3 MID1+ 7 MID3+ 4 MID1- 8 MID3+ 93 ASMB-584 User Manual Appendix B I/O Pin Assignments B.
B.14 Front Panel Audio Connector (FPAUD1) Table B.15: Front Panel Audio Connector (FPAUD1) Pin Signal 1 MIC2_L 2 AGND 3 MIC2_R 4 PRESENSE 5 LIN2_R 6 MIC_DEC 7 FIO_JD 8 N/A 9 LIN2_L 10 LINEOUT2_DEC B.15 8-pin Alarm Board Connector (VOLT1) 1 8 Table B.
1 2 Table B.17: Case Open Connector (JFP1) Pin Signal 1 CASEOP 2 GND B.17 Front Panel LAN LED Connector (LAN_LED1) Table B.18: LAN LED Connector (LAN_LED1/2) Pin Signal Pin Signal 1 LAN1_LED0_ACT 2 LAN2_LED1_ACT 3 VCC3_LAN1LED 4 VCC3_LAN2LED 5 LAN1_LED1_1000M 6 LAN2_LED2_1000 7 LAN1_LED2_100M 8 LAN2_LED0_100 9 VCC3 10 N/C B.18 SPI_CN1: SPI flash card pin connector Table B.
B.19 System I/O Ports Table B.20: System I/O ports Addr.
Appendix B I/O Pin Assignments B.21 1st MB Memory Map Table B.22: 1st MB memory map Addr.
www.advantech.com Please verify specifications before quoting. This guide is intended for reference purposes only. All product specifications are subject to change without notice. No part of this publication may be reproduced in any form or by any means, electronic, photocopying, recording or otherwise, without prior written permission of the publisher. All brand and product names are trademarks or registered trademarks of their respective companies. © Advantech Co., Ltd.
