User manual

15 ASMB-781 User Manual
Chapter 2 Connecting Peripherals
2.3 USB Ports (LAN2_USB34, USB56, USB78,
USB910, USB1112)
These ports support Plug & Play and hot swapping for up to 127 external devices.
The USB ports comply with USB specification rev. 2.0. Transmission rates of up to
480 Mbps and fuse protection are supported. The USB interface can be disabled in
the system BIOS setup.
The ASMB-781 is equipped with two or four high-performance 1000 Mbps Ethernet
LANs. They are supported by all major network operating systems. The RJ-45 jacks
on the rear plate provide convenient 1000 Mbps operation.
If all USB ports will be used, USB power is recommended to switch to +5V instead of
+5VSB.
LAN 1/2 LED Indicator
LAN 3/4 LED Indicator
LAN Mode LAN Indicator
1 Gbps Link on LED1 Green on (left)
100 Mbps Link on LED1 Orange on (left)
10 Mbps Link on LED1 N/A (left)
Active LED2 Green flash (right)
LAN Mode LAN Indicator
1 Gbps Link on LED1 Green on (Right)
100 Mbps Link on LED1 Orange on (Right)
10 Mbps Link on LED1 N/A (Right)
Active LED2 Green flash (left)
USB56
USB78
USB910
USB1112
USB 11
LAN1_USB12
LAN2_USB34
USB 12
USB 910
USB78
USB 56