User manual

61 ASMB-922I User Manual
Chapter 3 AMI BIOS
 BMC Support
Enable/Disable interfaces to communicate with BMC
 Wait for BMC
If enabled, motherboard will wait 30 ~ 60 seconds until BMC module boots up
completely. After that, the normal BIOS post screen will be displayed.
If disabled, motherboard will not wait for BMC module's response.
 Wait for BMC counter
Wait for BMC counter for initialize host to BMC interfaces.
The MB beep per 5 seconds to check it.
3.2.4.1 BMC Self Test Log
 Erase Log
Erase log options.
 When Log is Full
Select the action to be taken when log is full.
3.2.4.2 System Event Log
 SEL Components
Enable/Disable all features of system event logging during boot.
 Erase SEL
Choose options for erasing SEL.
 When SEL is Full
Choose options for reactions to a full SEL.
 Log EFI Status Codes
Disable the logging of EFI status codes or log only error code or only progress
code or both.
3.2.4.3 BMC Network Configuration
 Configuration Address Source
Select to configure LAN channel parameters statically or dynamically (by BMC).
Unspecified option will not modify any BMC network parameters during BIOS
phase.