Operating Instructions

Technical data – Device
14 / 140 DLT-V72 Operating Instructions V2.50 Preliminary
ATTENTION: Physical damage
Protect the display of the DLT-V72 from the memory effect.
The display of the DLT-V72 has to be protected from the burning in of a motionless image. An
image that has remained motionless for too long can cause irreversible damage to the display.
Recommendation:
 Use a screensaver.
 In the power management, set the display to turn off when there is no user input.
Resistive touchscreen
Type 5-wire analog resistive touchscreen
Construction Film-Film-Glass (FFG)
Fully laminated front
Surface Hardness JIS-K-5400: 2H/3H at 750 g
Chemically hardened glass
Resistance Shock resistance IK08
Mechanical resistance Tapping: > 1 million times with rubber test pen
Swiping: > 100,000 times with polydactyl pen
Chemical resistance Alcohols, Dilute Acids, Dilute Alkalis, Esters, Hydrocarbons,
Ketones, Household Cleaning agents (according to DIN 42 115)
Projected-capacitive touchscreen (PCT)
Type Projected-capacitive touchscreen
Construction Glass film
Surface Hardness JIS-K-5400: > 10 H at 750 g
Chemical AR coated glass:
DLT-V7210P and DLT-V7212P gloss value 85 at 60°
DLT-V7210K gloss value 70 at 60°
(according to ISO 2813, 7668; ASTM D 523, D 2457; DIN 67539)
Resistance Shock resistance IK08
Mechanical properties Thermally pre-stressed, acid-frosted float glass
Chemical resistance Alcohols, Dilute Acids, Dilute Alkalis, Esters, Hydrocarbons,
Ketones, Household Cleaning agents (according to DIN 42 115)
Graphic, network controller
VGA controller Intel
®
HD Graphics DX11
OpenGL 3.2
Full HW Acceleration for decode/encode of MPEG2 and H.264
Shared memory architecture
Up to 24 bit color depth, depending on which LCD is used
Network controller Intel
®
I210 Gigabit Ethernet 10/100/1000 MB/s
Network connection RJ45 connector
Integrated carrier
Two integrated status LEDs