Operating Instructions
Table Of Contents
- 1. Introduction
- 2. Technical customer support
- 3. Functional description
- 4. Unpacking, transporting, storing
- 5. Technical data – Device
- 6. Technical data – Radio modules (all optional)
- 7. Operation
- 8. General device configuration
- 9. Wi-Fi configuration
- 10. WWAN configuration
- 11. Mechanical installation
- 12. Electrical installation, cable connection, cable cover
- 13. Connectors
- 14. Integrated power supply, power supply cable
- 15. Optional equipment
- 16. Maintenance
- 17. Malfunctions and troubleshooting
- 18. Reasonably foreseeable misuse
- 19. Guidelines and certificates
- 20. End-of-life device disposal
- 21. List of figures
Wi-Fi configuration
52 / 140 DLT-V72 Operating Instructions V2.50 Preliminary
Information on radio performance
The consistency of the radio performance is dependent on the following factors:
1. Radio card (set transmission power)
2. Connecting cables
3. Antenna gain
Help table for the correct setting:
9.2. Differences between MS Windows and Linux
The radio configuration of the DLT-V72 with MS Windows operating system is described in the following
manual sections.
The radio configuration of the DLT-V72 with Linux is described in the “Advantech Linux Manual”.
Please contact our Technical Customer Support if required.
9.3. Preparation work at the factory
The following preparations have already been carried out at the factory for the optional radio functionality
of the DLT-V72:
4. The radio card and the corresponding drivers are installed.
5. A default profile with basic settings is defined.
NOTICE: Property damage
No access to radio cards in the DLT-V72
Radio cards are located inside the devices and are not accessible from the outside.
Only the manufacturer and its authorized service centers may open the device and install/remove radio
cards.